Workshop Manual

REPAIR STANDARDS
214
Major Name
Inspection Item
Nominal Assembly
Limit Repair Procedure Comments
Category
of Part Dimension Standard Value
Lubricating oil pressure (1400 rpm)
4.0 – 4.5
2.0
kgf/cm
2
(psi/kPa)
(56.89 – 64.00
(28.4/196)
/392 – 441)
Vane, rotor and cover clearance
0.02 – 0.07 0.15 Replace
(0.0008 – 0.0026) (0.006) vane, rotor or cover
Rotor and vane clearance
0.14 (0.006) 0.20
Replace rotor set
or less (0.008)
Clearance between pump body 0.20 – 0.27 0.40
Repair or replace
and vane (0.008 – 0.011) (0.016) Pumping rate L/min
1000 rpm, SAE #30, pumping pressure 13 4 kgf/cm
2
(56.9 psi/392 kPa)
oil temp. 50°C (122°F)
Clogging and damage to oil filter Replace Initial operating pressure of main oil 5.8 – 6.2 filter relief valve kgf/cm
2
(psi/kPa) (82.49 – 88.18
/569 – 608.2)
Lubricating System
Oil
pressure
Oil lpump and Relief valveOil filter
()