Workshop Manual

5–6 ENGINE ASSEMBLY III
10. Intake Manifold and Gasket
1) Install the intake manifold gasket.
The intake manifold gasket must be installed
with its unchamfered corner facing up and to
the front of the engine.
Refer to the illustration.
2) Install the intake manifold.
3) Tighten the intake manifold bolts to the speci-
fied torque a little at a time in the numerical
order shown in the illustration.
N·m (kgf·m/lb.ft)
Unchamfered corner
Rear
12
11
10
8
6
2
4
1
3
5
9
7
11. Exhaust Manifold and Gasket
1) Install the exhaust manifold gasket.
The "TOP" mark must be facing up.
2) Install the exhaust manifold.
3) Tighten the exhaust manifold bolts to the speci-
fied torque a little at a time in the numerical
order shown in the illustration.
N·m (kgf·m/lb.ft)
Intake Monifold
4B 14–24 (1.4–2.4/10–17)
Bolt Torque
6B 21–30 (2.1–3.1/15–22)
Exhaust Manifold
4B 16–25 (1.6–2.6/12–19)
Bolt Torque
6B 25–31 (2.6–3.2/19–23)
10
9
6
5
2
3
7
11
12
8
4
1
6BG1