Workshop Manual

REPAIR STANDARDS 14–11
Major Name Nominal
Assembly
Category
of Part
Inspection Item
Dimension
Standard Limit Repair Procedure Comments
Value
Valve clearance (inlet & exhaust) 0.4
Adjust
(cold) (0.016) Clearance between rocker arm 0.01 – 0.05 0.2 Replace bushing or shaft and rocker arm (0.0004 – 0.002) (0.0079) shaft Rocker arm shaft wear
18.98 – 19.00 Dia. 18.85
Replace
(0.747 – 0.748) (0.742)
Air cleaner element condition
Special order item from manufacturer
Valve SystemIntake System
ValvesAir cleaner