Workshop Manual

ENGINE ASSEMBLY I 3–9
11. Taper Bushing (6B series only)
Remover: 9-8521-0122-0
Use the taper bushing remover to remove the crank-
shaft end taper bushing.
Taper bushing
remover
Pulley
Crankshaft
Taper
bushing
15. Flywheel
Loosen the flywheel bolt a little at a time in the
numerical order as specified.
6
5
13
2
4
16. Crankshaft Rear Oil Seal (Axial Type)
With the oil seal pushed in deep, install the special
tool as shown in the illustration and remove the oil
seal.
Oil Seal Remover: 5-8840-2360-0