Bluetooth CD Stereo System Model: ITCDS-5001 Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS Invisible and hazardous laser radiation when open and interlock failed or Defeated. Avoid direct exposure to beam. a tabletop, etc., or where it can be pulled on by children or tripped over accidentally. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3
4
PRODUCT OVERVIEW FRONT VIEW 1 2 3 4 5 6 IR POWER FUNCTION SCAN TUN- TUN+ AUX IN VOLUME 7 8 9 10 11 BALANCE 4. 5. 6. 7. 8. 9. TREBLE 12 13 14 15 16 17 18 1 & 2. VU Meters 3. BASS 19 20 21 Open/Close Button 12. Volume Button 13. Previous Button 14. Balance Control Knob Remote Sensor 16. Bass Control Knob Aux In Jack 18. Treble Control Knob 19. Scan Button CD Drawer Display 15. Play/Pause Button Power Button Headphone Jack 17. Next Button 20. Tune Down Button 10.
REAR VIEW SPEAKER OUTPUT DC 12V 2A FM ANT. R+ R- 22 22. FM Antenna L- L+ 23 24 23. Speaker Output Connectors 24. DC IN Jack EXTERNAL SPEAKER 25 25.
REMOTE CONTROL 1 2 3 4 5 6 7 14 FUNC PROG. REPEAT TREBLE BASS 17 R BALANCE 15 16 18 L 8 9 10 19 11 12 13 20 TUN- SCAN TUN+ 21 1. Power ON/OFF Button 12. Scan Button 2. Function Button 13. Tune Down Button 3. Random Play Button 14. Open/Close Button 4. Treble Up Button 15. Repeat Button 5. Right Balance Button 16. Program Button 6. Treble Down Button 17. Bass Up Button 7. Left Balance Button 18. Bass Down Button 8. Stop Button 19. Volume Up Button 9.
REMOTE CONTROL BATTERY INSTALLATION FIRST TIME USE Remove and discard the insulation film as shown on Fig. 1. BUTTON CELL REPLACEMENT Fig.1 1. Push and slide out the battery holder as shown on Fig.2. 2. Replace the battery with a new CR2025 button cell as the polarity marking facing upward as shown on Fig.3. 3. Close the battery door as shown on Fig.4. Fig.2 CR2025 SN + OPEN PUSH RELEASE Fig.4 Fig.3 BATTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1.
GENERAL OPERATION 1. Connect the external speakers by connecting the respective R & L wires on the back of the unit. Note: Make sure the cables are connected firmly. If there is no sound, please reconnect. Make sure the red cable is connected to the red connector, and the red-black cable is connected to the black connector. 2. Connect the adapter to the AC outlet and the DC IN jack at the rear of the unit. 3. Press the POWER button on the unit or the turn on the unit. button on the remote control to 4.
FM RADIO OPERATION 1. Press the FUNCTION button on the unit or the FUNC button on the remote control to switch to FM mode, the FM frequency will appear on the display. 2. Press and hold TUN- or TUN+ to search automatically until a station is found, and it will play automatically. 3. Press TUN- or TUN+ button to manually adjust the frequency. 4. Press the REPEAT button on the remote control to switch between stereo and mono.
- Press the REPEAT button on the remote control once to repeat one track, press it again to repeat all tracks, press it the third time to cancel repeat playing. - Press the button repeatedly to switch to random track and play randomly. Programming: - During playing, press the button to stop. - Press the PROG button on remote control, "P01" will appear on display for one second then "00" will blink on the display. - Press the or button to select the track for P01.
CARE AND MAINTENANCE Caring for Discs Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to touch the shiny, unprinted side of the disc. ● Do not attach adhesive tape, stickers, etc. to the disc label. ● Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit. ● If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).
TROUBLESHOOTING GUIDE SYMPTOM No power. No sound or weak sound. Remote Control is not working. Radio has static. Disc not played. Bluetooth is not working. POSSIBLE CAUSE POSSIBLE SOLUTION The adapter is not connected. Connect the adapter to the unit to a wall outlet. The unit is off. Press the Volume level is too low. Raise the volume level by rotating the volume knob on the unit or press the button on the Remote Control. Incorrect function mode is selected.
SPECIFICATIONS AMPLIFIER Output Power ..........................................................................................10W+10W Frequency Response ..................................................................... 60 to 20,000 Hz TUNER Frequency Range .......................................................................... 87.5- 108.0 MHz CD PLAYER Frequency Response ..................................................................... 60 to 20,000 Hz Signal-to-Noise Ratio .....................
Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable.
