User's Manual

SIM card is unavailable.
 Fixed dial: Set the phone to restrict calls to a limited set of phone
numbers, if supported by your SIM card.
 Change password: You can change the password of PIN, PIN2.
 Phone Lock: after the phone lock is activated, the correct password is
required to start up the phone or restore the factory settings. The factory
setting is 0000 by default.
 Auto Keypad Lock: press the left soft key to deactivate the keypad lock, or
select automatic lock after 5s, 30s, 1 minute, or 5 minutes.
 Change Password: you can change phone password.
6.8.5 Connectivity
 Used to connect the network to use, you can also choose to add, edit or
delete your network settings
 Bluetooth
Can transfer file via Bluetooth or talking phone call via Bluetooth headset
6.8.6 Restore factory setting
Some function settings can be reset to factory settings by this option.
This function requires the correct password to be executed.
The factory password is preset as 1234.
6.9 User Profiles
You can select different modes on different occasions to carry out the personal
settings in the environment modes such as ring tone, vibration, volume, etc. This
function makes it possible to get adjusted to different situations without changing
the ring tone settings at multiple places, and you only need to switch to the pre-set
environment mode.
 General mode: It is ringing alert by default;
 Meeting mode: It is vibrating alert by default;
 Outdoor mode: It uses the maximum volume, vibration + ringing alert, by
default;
 Indoor mode: It is ringing alert by default;
 Headset mode: It requires a headset to support this function.
In every mode, you can edit the following in a separate manner:
 Tone settings: set the tones for incoming calls, power on, power off,
messages tone and keypad tone, respectively.
 Volume: set the volume for the ring tone and key tone.
 Alert type: 4 manners are available: ringing, vibration, vibration and ringing,
and vibration then ringing.
 Ring type: you can carry the following 3 settings: single, repeat and
ascending.
 Extra tone: 4 tones are available: warning, error, network connection, calling