User's Manual

Install / Remove the Memory Card

The Memory Card is a handy mobile storage device that expands the mobile

phone’s storage capacity. To install/remove the memory card, perform the

following:

1. Turn the mobile phone OFF.

2. Snap open the phone’s back cover and the SD card lock.

3. Carefully insert the Memory Card into the slot, making sure that the

card’s gold plate is facing down and in proper alignment with the

phone’s metal contacts.

4. Carefully lock the SD card and put the cover back on.

5. To remove, carefully slide the lock and pull the card out of the slot.

Charge the Battery

1. Plug the charger into the electrical outlet.

2. Connect the small end of the charger connector into the mobile

phone’s charging slot.

The battery indicator icon will flash until charging is finished. When charging is

complete, i.e. the battery charging icon stops flashing, disconnect the phone from

the charger.

: Do not forget to unplug the charger from the electrical outlet after charging.

: Only use approved charger and other accessories.

: You can use the phone while charging, but charging time may increase. When

charging the handset in its Power Off state, a charging indicator will appear on the

screen.