MyQ-tv User Manual 1
Contents Contents ---------------------------------------------------------------------------------- 2 Safety and Maintenance------------------------------------------------------------- 4 Basic Knowledge ---------------------------------------------------------------------- 9 BRIEF INTRODUCTION ............................................................................ 9 Your Mobile Phone------------------------------------------------------------------ 10 1.1 APPEARANCE ..................................
4.7 BASIC ENGLISH AND NUMBER INPUT MODE ........................................ 27 4.8 QUIT FROM THE MENU .................................................................... 27 4.9 USB TETHERING ........................................................................... 27 Menu Functions ---------------------------------------------------------------------- 28 5.1 MESSAGING .................................................................................. 28 5.2 PHONEBOOK .................................
Safety and Maintenance While using the cell phone, please check it with the following table: • Before use, please read instruction manual carefully. • Do not power on the cell phone when use of cell phone is prohibited or it may cause interruption or danger. • Please keep your cell phone off when you are on a plane. If functions that will automatically power on your cell phone, such as alarm clock or calendar, are setup, please check and cancel the configuration before boarding the plane.
hospital and other special places according to specific regulations there. • Keep the cell phone away from mechanic vibration or shaking. Do not hit the screen of your phone with sharp tool. • If plastic cover or case is used for cell phone, surface coating may be damaged. • Do not disassemble the cell phone boldly. • Do not use benzene, thinner or alcohol to clean the cover of your cell phone. Keep your cell phone away from corrosive chemicals such as detergent.
While using battery, please observe following points: • Before use, please read instructions for use and as well as label on the surface of battery. • Please charge the battery in a cool and well-ventilated room. Otherwise, high environment temperature may lead to overheat, smoking, burning, distortion or even explosion of battery. • There are special protection circuits and devices inside battery, so do not open the battery; Otherwise it may lead to short circuit or electrolyte leak.
• Do not put the battery in places that are too hot or too cold. Temperature above 55℃ or below -10℃ may affect performance of the battery. • Do not put the battery in fire so as to avoid explosion. • Do not put the battery in water so as to avoid short circuit inside, resulting in battery overheat, smoking, distortion, damage or even explosion. • Treat battery according to local regulations (for example, recycling). Do not treat battery as domestic garbage so as to avoid explosion and pollution.
• When to pull out the plug, hold the charger instead of dragging the power cable so as to avoid damage of power cable. • Keep the charger out of reach of children so as to avoid danger. Do not place the battery in fire; follow local laws and ordinances in disposing used battery. Check the model number of the charger before using it to charge the mobile. Only use approved battery, charger and accessories applicable to the specific mobile model.
Basic Knowledge Brief Introduction Thank you for choosing the GSM/WCDMA function cell phone. You will know how to use this phone roundly after reading the manual.
Your Mobile Phone 1.1 Appearance 1.2 Key description Key Description Send key Making or answering a call. In standby mode, press this key to access the Call History.
End key Left soft key Right soft key OK key Left key Right key Up key End calls or reject calls. Long press: Power on, power off. In standby mode, press this key to lock keypad. In standby mode, press left soft key to enter main menu. In standby mode, press right soft key to Phonebook. Confirm operations you have operated. In standby mode, short press OK key to mobile TV, long press OK key to Internet. In main menu, move the cursor left.
Aa key Press Aa to switch the input method status. SPACE In input interface, press this key to enter a space. +/o 、 -/i key Regulate volume DEL Delete characters or numbers. Faceboo k key Twitter key In IDLE, press this key to enter Facebook. In IDLE, press this key to enter twitter. 1.3 State icons Indicates SIM Card signal strength. WIFI disconnect. WIFI connect. That is using 2G network of USIM. That is using 3G network of USIM.
Indicate Bluetooth Indicates a headset is connected to the phone. Indicates vibration mode has been activated. Keypad has been locked. Indicates battery power level. 1.4 Screen background light Background light can illuminate the screen. When you power on your cell phone, background light will turn on for a certain period. If no key is pressed within the period, the background light will turn off automatically so as to save battery.
Instructions before Use 2.1 Install and charge the phone 1. Remove the battery cover 2. Insert the SIM card 3. Insert the Memory card 4. Install the battery 5. Plug the travel adapter into the phone 2.2 Power on/off Long press the End Key to power on / off the phone. 2.3 Security password You can set access password to avoid your SIM card is used by others. 2.3.1 PIN code If your cell phone has enabled PIN code protection, there will be prompt for entering PIN code.
wrong input of PUK code amounts to ten times, SIM card will lose efficacy. PUK code is provided by network service operator.
Quick Guide 3.1 Dial numbers When logo of network provider appears on the screen, you can dial or answer calls. Information bars at upper right corner of the screen show intensity of network signal. (Four information bars represent most intense signal.) Since quality of call is greatly affected by barrier, movement in small range can effectively improve quality of call. 3.1.1 Make domestic phone call Use number keys to input phone number in standby state and then press send key to start the call.
To make an international call, press [O] key for international long-distance call appears on the screen You can enter international phone number according to following sequence: + Country code Completed phone number Send key After pre-fix, enter country code and complete phone number you want to dial. According to conventions, county code for Germany is 49, and 44 for UK and 46 for Sweden, etc. Similar to making an international call, “0” before city code should be removed.
As long as you are within coverage of network (which can be found out by checking network signal intensity indicating bars on upper left corner of the screen), you can call emergency service. If your network provider does not provide roaming service for the area, “Restricted Service” will be displayed on the screen. As long as you are within coverage of network, you can make an emergency call even without card. Note: Some networks do not allow dialing 112 for emergency call. 3.
Talk options can only be seen in the process of talk, and functions such as call wait and multi-party talk have to be supported by network. Please contact your network provider. You can directly enter phone number at current talk screen and press Send key to dial new phone number. In talk options, you can make following operations: Hold/Release single call Hold current talk or resume hold talk. End single call End the call. New call Make a new call. Phonebook Enter the phonebook.
Enter multi-party talk state. You can hold multi-party talk or terminate the call. Note: Menu items marked with * appear in specific conditions only. For example, “Swap” appears only when calls in talk state and hold state exist at the same time. Besides, multi-party talk function should be applied from network service operator. 3.
Basic Functions 4.1 Dial phone 4.1.1 Direct dial In standby state, press number keys to enter the telephone number you want to dial. If you input wrong number, press [right soft key] to delete the number before the cursor. Once phone number to dial has been input, press [Send key]. If the phone number being dialed out can be recognized by phonebook, name and icon of contact person will be displayed on dialing screen, and calling animation is displayed at the same time. Press end key to end a call. 4.1.
4.2 Answer incoming call When there is an incoming call, incoming call animation will be displayed together with special ringtone or vibration. If phone number of the caller can be recognized, the number will be displayed on incoming call screen. If information about the number is stored in contacts, caller’s name and icon will also be displayed. At the same time, specified ringtone will be played or play music or vibrate according to current settings.
4.4 Make international long-distance call Press [+] key before international phone number can be dialed. “+” sign tells the network you are making an international call. Input country code, area code (without 0) and phone number and then press [Send key]. Note: Some networks do not allow “+” for dialing international numbers. 4.5 Talk options The cell phone provides some talk control functions in the process of talk. Press [Options] soft key to access the talk control functions in the process of talk. 4.5.
If there is a second incoming call in the process of talk, the screen will display a second call is waiting. Call wait function is only available when the network supports this service and you have set to Enabled in Call wait menu. Press [Answer soft key] or [Send key] to answer second call. When the second call is put through, the first call will be switched to hold state. Press [End key] to terminate the second call. 4.5.
In edit state, press [aA] key to select proper text input mode. This cell phone provides English capital/small letter, Number input modes, symbol and so on. Default input mode after power-on is abc. Enter symbol through the [Options] key-Insert symbol. 4.7 Basic English and number input mode In Basic English input mode, you may press a key on the keyboard to enter a letter. In number input mode, press a number key on the keyboard to enter number. 4.
Menu Functions You can press left soft key in standby state to enter the main menu. Once you have entered the main menu, you can select corresponding options by using mouse to move the cursor. When the cursor moves to an option, icon of the option will be highlighted in the original position with white box. Stop the cursor on an option and press [OK] key to enter the function window of the option. You can also use short-cut method, i.e.
Add video: Add video from phone or memory, and also record video for the MMS. Add subject: Add subject for the MMS. Slide options: Add a new slide behind or before the MMS. Switch to MMS: Switch SMS mode to MMS mode. Advanced: You can insert text template, attachment, contact number, contact name or bookmark in MMS or SMS by the function. Save: Save SMS or MMS to drafts. Details: View details of the SMS or MMS. 2. Inbox The SMS and MMS you received are all stored in inbox.
2). Input your user password. 3). Activate the account you set. 4). You can edit email and send or receiver. NOTES: In email accounts menu, select email accounts optionedit advanced settings, you can set outgoing/incoming server, signature and account settings. 8. Broadcast message Use the menu to set the broadcast message. 9. Templates Use the templates to the SMS or MMS. 10. Message settings Use the menu to set text message, multimedia message and Service message. 5.
card and the phone. 8. Delete all contacts: Use the menu to delete records from the SIM card or phone. 9. Backup contacts: Use the menu to backup all records in the SIM card and phone. 10.Restore contacts: Use the menu to restore all contacts in the SIM card and phone. Note: This phone can store 1000 phone numbers. 5.3 Call center 5.3.1 Call history All calls / Dialed Calls/ Missed Calls / Received Calls You can view a list of the above. 5.3.2 Call settings Caller ID If you choose [Hide ID].
You can add or delete the group. Advanced settings 1). Blacklist Activate blacklist mode and edit the blacklist numbers. You can’t receive the calls in the list. 2). Auto redial Open or close the function. 3). Call time display Open or close the function, display the times when calling. 4). Call time reminder Open or close the function, remind with a warning tone during the calling. 5). Auto quick end Automatically end the calling when time is on. 6). Connect notice Connect tone when call connection. 7).
Last web address: Enter the last web page. Recent Pages: Enter the history page Stored pages: View stored pages. Settings: set the web 5.6 STK You can enter the USIM card application. 5.7 WLAN Use the menu to search available wireless network, you can connect to a wireless network success, and you can through the WLAN connected to the Internet. 5.8 Camera Use this function to capture picture.
search new device, you can see some devices in the list, choose any one, and press left soft key to Pair, enter the Passcode matched, and allow this device to connect automatically, So you are successful match to a bluetooth device. Now you can choose any file via bluetooth send to you have paired bluetooth device 5.11 Mobile TV Use this function you can select location city to search TV channel. And you can choose the channel to watch TV. 5.12 Fun In the menu, you can view the Java and games. 5.
Delete overdue: Delete the task what overdue. Delete All: Delete all the tasks in the phone. Jump to date: Jump to the specified date. View uncompleted: View the task what is uncompleted. Send vCalendar: It provides four options: As text message, As multimedia message, As Email, Via Bluetooth. Save as file: Save to file. 5.13.3 Alarm In the alarm interface, you can press left sofy key to eidt the alarm.
Input the currency rate, and then press OK to input local currency. 5.13.7 Stopwatch Enter the menu to use the stopwatch. It provides two options: Typical stopwatch, nWay stopwatch. 5.13.8 World clock You can look up the time of the other city in the world. 5.13.9 Notes Use the menu to add a new note. 5.14 Plugger In the menu, you can view a network connection of Plugger. 5.15 Multimedia 5.15.
operate the followings: New record: Record the new file. Play: Play the recorder file. Append: Append the new record to the file what you select. Rename: Rename the video file. Delete: Delete the video file. List: View the list of files. Settings: It contains two options: storage, File format. Use: It can be used to user profiles. Send: You can send the file to MMS, Email and Bluetooth 5.15.5 FM radio Please pull out signal antenna, you can use the menu to listen to the radio.
It provides five profiles: General, Silent, Meeting, Outdoor, My style. Press [options] to set the followings: Activate: Activate the profile. Customize: It contains eleven options: Alert type, Ring type, incoming call, Ringtone Volume, message, Message volume, keypad, keytone volume, Power on/off, System alert. 5.16.2 Phone Settings 1. Time and Date Use the menu to set time and date. It contains five options: Set time zone, Set time/date, Set format, update with time zone and Auto update time. 2.
1. Network selection: you can search the network you want by manual/auto 2. Preferences: press left soft key, you can do the following options: add from the list, new, change priority, delete. 3. Service selection: select service for 3G SIM card, the function provides three choices: GSM/GPRS, WCDMA, automatic. 4. Network information: View the network information of the current SIM card. 5. GPRS connection: set when needed or always. 6. GPRS transfer pref.: set Data prefer or call prefer. 7.
4. Data service You can set on or off. 5.16.7 Restore Factory Settings The default password is 1234. 5.16.8 sound effects You can select different effect by the function. 5.17 MSNGR In the menu, you can view a network connection of MSNGR. 5.18 Calendar Enter the menu, press [options] to set the followings: View Tasks: Set or view the task. Add event: You can add a new task, you can edit type, start time, end time, subject, alarm time, repeat, location and details, and the last save this task.
FAQ If any problems are encountered while using the cell phone, please solve them with reference to following items. If the problems still exit, please contact dealers or service provider appointed by Novo immediately. ■ “Enter PIN code" appears on the screen: Enter valid PIN code of your SIM card. Please contact network service operator immediately if you do not know the code. ■ “Enter PUK code" appears on the screen: Your SIM card will be locked if you enter wrong PIN code for three times.
■ Standby time declines: Signal at your location is weak so that the cell phone has to search signal for a long time. When you don’t want to answer any call, please power off for a time being. It is also possible that the battery has been used for a long time and approaches its life-span. In this case, please replace the battery. ■ Cell phone fails to boot: Check battery volume or charge the battery. Try to power on while charging.
■ Can not select some functions: The service is not available or network service operator of your location does not support this service. Please contact service provider or dealer or network service operator appointed by Novo immediately.
T-Flash Card Introduction The cell phone support T-Flash card to enlarge the storage. Operations as follows: T-Flash card install/remove The T-Flash card is on the right of the SIM socket. Take out battery first if you install the T-Flash card, and then directly into the T-Flash card. If you remove it, operate as contrary operations of installing T-Flash card use T-Flash as one of the memorizer of cell phone, format it when you first use, operations as follows: 1.
Without, you can establish them. These catalogs saved relevant files only, otherwise, can’t show what you save. for example: AUDIO can save these format files: amr, mid, MP3. MY MUSIC can save these format files: amr, mid, MP3. PHOTOS can save these format files: bmp, gif, jpg. SMS can save the messages what exported from the cell phone. VIDEOS can save these format files: MP4, 3GP.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC.
