Installation Guide

ManualsBrandsItalia ManualsBathCapri 3-Piece Bathroom Accessory Set in Polished Chrome

1/5

By DGB Enterprises LLC

www.italiabath.com

info@dgbproducts.com

Italia Bathroom Accessory Sets

Towel Bar

Towel Ring

Tools & Hardware

Toilet Paper Holder

Robe Hook

Hardware Included: A B C D

Allen Wrench 1x 1x 1x 1x

Plastic Wall Anchors 4x 2x 2x 2x

Mounting Screws 4x 2x 2x 2x

Mounting Bracket Plate

(Located pre-installed in item. Must

be removed prior to installation).

2x 1x 1x 1x

Set Screws

(Located pre-installed in item. Must be loosened

to remove the mounting plate prior to installation).

2x 1x 1x 1x

Installation & Care Guide

Phillips Screwdriver

Tools required:

Power Drill ¼” Drillbit

Tile / Masonry Stone Drillbit

if Drilling Into Tile or Stone

(Masonry wall anchors not included)

Hammer

Level Tape Measure Pencil

Summary of content (5 pages)

PAGE 1
Installation & Care Guide Italia Bathroom Accessory Sets A B Towel Bar Towel Ring By DGB Enterprises LLC www.italiabath.com info@dgbproducts.com C D Toilet Paper Holder Robe Hook Tools & Hardware Hardware Included: A B C D Allen Wrench 1x 1x 1x 1x Plastic Wall Anchors 4x 2x 2x 2x Mounting Screws 4x 2x 2x 2x Mounting Bracket Plate 2x 1x 1x 1x (Located pre-installed in item. Must be removed prior to installation). Set Screws (Located pre-installed in item.
PAGE 2
Installation Instructions Towel Bar 1 2 Remove mounting plate(s) from back of item. Level and mark position of the item on the wall. a. Use the provided allen wrench to loosen set screw on bottom of the item to remove the mounting plate. a. If mounting into ceramic or tile, place masking tape on the mounting areas before marking the location to prevent the drill from slipping and damaging the tile. 3 4 Place mounting plate on the wall and mark position of the holes in the mounting plate.
PAGE 3
Installation Instructions Towel Ring 1 2 Remove mounting plate from back of towel ring. Level and mark position of the towel ring on the wall. a. Use the provided allen wrench to loosen set screw on bottom of the towel ring to remove the mounting plate. a. If mounting into ceramic or tile, place masking tape on the mounting areas before marking the location to prevent the drill from slipping and damaging the tile.
PAGE 4
Installation Instructions Toilet Paper Holder 1 2 2 Remove mounting plate from back of toilet paper holder. Level and mark position of the toilet paper holder on the wall. a. Use the provided allen wrench to loosen set screw on bottom of the toilet paper holder to remove the mounting plate. a. If mounting into ceramic or tile, place masking tape on the mounting areas before marking the location to prevent the drill from slipping and damaging the tile.
PAGE 5
Installation Instructions Robe Hook 1 2 2 Remove mounting plate from back of robe hook. Level and mark position of the robe hook on the wall. a. Use the provided allen wrench to loosen set screw on bottom of the robe hook to remove the mounting plate. a. If mounting into ceramic or tile, place masking tape on the mounting areas before marking the location to prevent the drill from slipping and damaging the tile.