User`s guide

INTRODUCTION

i-tec USB 3.0 Metal Charging HUB will immediately catch your attention thanks to its elegant

metallic design. It is an ideal companion for everybody who does not have enough USB ports in

his/her notebook, ultrabook or PC and who has to constantly connect and disconnect his/her favorite

USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3 players, printers,

etc.

This HUB offers ten USB 3.0 ports with the Plug & Play function and standard USB charging – the

HUB will automatically detect connected equipment for USB charging. One of the advantages is that

thanks to their placement you have enough space even for connection of large pieces of equipment.

The USB 3.0 interface is important mainly for data transfers from USB 3.0 memory cards and flash

disks which will use its high transfer speed most.

The advantage is included external power adapter which you can use for backing up data on

external hard drives or for connecting high power consumption devices which are powered directly

from the USB port.

This HUB does not require installation of drivers. You will just connect it by the USB cable to your

computer and immediately you can start using it. This HUB has a built in overcurrent protection of

your computer in case of short connection on the peripheries. The interface is compatible with USB

2.0 / 1.1.

Thanks to its compact dimensions and low weight it is an ideal companion to your notebook when

traveling.

INSTALLATION IN WINDOWS XP/VISTA/7/8/8.1, MAC OS X AND HIGHER

The HUB is installed automatically, no need install drivers. Connect the connector of the power

adaptor to the HUB and connect the power adaptor to a socket outlet with 230V. Then plug the HUB

via USB cable into available USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow

the on-screen instructions. The HUB will be installed and displayed in Device manager as “USB 3.0

HUB” and “USB 2.0 HUB”.

User’s guide

IENG