User's Manual

4.Click “Target” to set personal target
and save.They will display in the main
interface.
(PaceCount, Distance, Calorise, Minute)
( )
BLE Pedometer User's Guide
Download App from App Store before
Search “BLE Pedo” and
download the App :
using.
1.Turn device power on,
press pairing button,
Green&Red LED flash,
now in pairing mode;
Pairing
Button
Power
Button
Connecting
Please make sure your BLE Pedometer
in pairing mode before activate
2. Click "Activate"
to connect.
Online Mode
1.Click “START” to enable Bluetooth ( )
1
2.Set Music ON/OFF
1.Click “Data Reset” to restore when the first
time using.
2
2.After “START”clicked,the real-time
interface starts to work, it will dispaly:
PaceCount record ;
Time record ;
Consumption of calories record ;
Distance record ;
Instantaneous speed ;
( )
( )
( )
( )
( )
4
5
3.Click “Physical” to set personal physical
data (Height, Stride, Weight) and save.
Setting Interface
5.Click “System of Units” to change
U.S. and S between I
9
6
7
8
3.Target completion progress
.
.
“Setting”---“Target” to set a daily target,
it will show you the achieved percentage,
daily steps, daily time ( )
9
Offline Mode Weekly Data Chart
1.Micro USB Plug for
charging:
- Charging: RED LED on;
- Charging Full: LED off;
5.Reset button: Click
to reset Bluetooth
4.0 Pedometer;
the
1
5
Support Charge Micro USB
Device introduce
2
3
4
2.
3.Pairing Button;
4.Power Button.
LED;
Once “START” clicked, Apple host screen
will be locked, all function are unworkable,
Click Unlock icon( ) to unlock.
4.0 Pedometer to record real-time data.
1.Stored data will be
shown in week: Times,
Calories, Distance
Please make sure your BLE Pedometer
in pairing mode before activate
2.Press “Setting Time”
to review weekly
history records
Please make sure your BLE Pedometer
in pairing mode before activate
Click “History” to view weekly data chart,
there are Times, Calories, Distance
When in Offline Mode, the pedometer will
record data itself, and upload to Apple host
after re-connection.
It will be in Offline Mode after:
Red LED will be on for 2 seconds indicating
entering Offline Mode
1.Pressing pairing button under Online Mode;
2.Turn off App when in Online Mode;
3.Turn off the screen of Apple host when in
Online Mode;
4.When Pedometer is disconnected to
Apple host;
5.When Pedometer is more than 10m to
Apple host;
4
5
7
6
1
8
9
2
Pedometer & Apple host beyond working range
Pedometer & Apple host within working range
FCC ID:VYVVTL-BP01
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.