UV-C STERILIZER ROBOT VACUUM CLEANER WITH HEPA FILTER CE mark states that the product is compliant to European Economic Area Directives Low Voltage Directive (LVD) 2014/35/EU 2004/108/EC EMC Directive It is possible to request a full copy of Declaration of Compliance from the Distributor. This product comply with the rules of RoHS Directive (2011/65/EU). This product comply with the rules of EuP Directive (2009/125/EC). Thank you for purchasing the product. Please read through the instructions before use.
Safety Instructions Before using this product, please read the following safety instructions and follow all routine safety precautions! Please read these instructions carefully. Please keep this book of instructions. Any operation not in compliance with this book is likely to cause damage to the product. The right to final interpretation resides in the Company.
Advanced features Advanced features 1. Patented Intelligent Programmable Water Tank (optional accessory) The wet mopping function (sold separately) can control the rate at which the water tank emits water automatically. You may also select the water emit rate through the remote control to achieve the optimal uniform wet mopping effect. When charging, the tank will not emit water, protecting the floor from water leakage. 7.
Product Introduction Parts & Features Unit Top This product can be used in cleaning family homes, hotel rooms, and small offices, and performs well on a variety of short-pile carpets, wood floors, ceramic tile ,etc. Functionality overview The cleaner works on a rechargeable lithium-ion battery and under intelligent microcomputer control.
LED Display Screen LED Display Screen Dustbin Full The" "icon will light up to indicate that the suction inlet is blocked or the dust bin is full, or the garbage sensors is covered with dust. FULL GO Mode Before cleaning, remove any small items or obstacles in the room, especially power cords and other easy entanglements.
Auto-Charging Dock Station Remote Controller Button Functions Power indicator Infrared signal emission window Press " " and the cleaner will enter Auto-Charging Mode. Press " " and the cleaner will enter the Sleep/Wake-up Mode. When in Sleep Mode, press and hold this button for 10 seconds to enter Wake-Up Mode.
Settings of the UV Lamp/Intelligent Water Tank (optional feature) on the Remote Controller Settings of Schedule/time for the remote controller 1. UV Lamp Settings 1. Settings of current week day, hour/minute At default mode from the factory, the UV lamp is on. If you want to turn off the UV lamp during cleaning, use the following steps： a. In standby mode, press the " " button, then press the " " button to enter the UV lamp settings. icon will turn on and the " " icon will flash.
Installation & removal and cleaning of the main brush assembly Installation & removal and cleaning of the dust bin 1.Installation & removal of the dust bin of the cleaner 1. Removal of the roller brush assembly: 1. Ａｓ ｓｈｏｗｎ ｉｎ Ｆｉｇ． １， ｐｉｃｋ ｔｈｅ Ｕ ｓｈａｐｅｄ ｃｌｉｐ ｅａｃｈ ｓｉｄｅ ｏｆ ｔｈｅ ｓｗｅｅｐｉｎｇ ｂｒａｃｋｅｔ ｓｉｍｕｌｔａｎｅｏｕｓｌｙ ｗｉｔｈ ｂｏｔｈ ｉｎｄｅｘ ｆｉｎｇｅｒｓ ｔｏ ｒｅｍｏｖｅ ｓｗｅｅｐｉｎｇ ｂｒａｃｋｅｔ． 2.
Installation and removal of the ONE COVER ALL main brush assembly Installation of the intelligeng water tank/ trailing bar/ mop (optional accessory) 1. Installation of the trailing bar/ mop: 1. Ｉｎｓｔａｌｌ ｔｈｅ ｍｏｐ ｏｎｔｏ ｔｈｅ ｐｏｓｉｔｉｏｎ ｗｈｅｒｅ ｉｔ ｉｓ ｔｏ ｂｅ ａｄｈｅｒｅｄ． 2. Ａｓ ｓｈｏｗｎ ｉｎ Ｆｉｇ． １， ｍｏｕｎｔ ｔｈｅ ｔｒａｉｌｉｎｇ ｂａｒ ｏｎｔｏ ｔｈｅ ｕｎｉｔ ｂｙ ａｌｉｇｎｉｎｇ ｉｔ ｗｉｔｈ ｈｏｌｅｓ． 2. Installation of roller brush assembly 1.
Common Failures and Troubleshooting Dimensions and Parameters Technical specification for the cleaner The cleaner will sound the alarm when it stops working or fails to start working in the following circumstances; users may follow Attention the prompts to respond accordingly.
