Use and Care Manual
Press " " and the cleaner will enter Auto-Charging Mode.
Press " " and the cleaner will enter the Sleep/Wake-up Mode. When in
Sleep Mode, press and hold this button for 10 seconds to enter Wake-Up
Mode.
Press " " and the cleaner will enter Turbo Cleaning Mode, suitable for
very dirty floor or carpet.
Press "
" and the cleaner will enter Wall Follow Mode.
Press " " and the cleaner will enter Spot Cleaning Mode.
Press " " and the cleaner will enter Full Go Mode.
Press "
" and the cleaner will enter the Settings of schedule/time, UV
lamp ON/OFF, Water tank outflow (optional feature). This is a
combination function button, see page 11-12 for more information.
Press
"
" and the cleaner will enter Automatic Cleaning Mode.
Press
"
" an
d the cleaner will start forward movem
ent.
Press
"
Press "
Press "
" and the cleaner will start backward movement.
Auto-Charging Dock Station
Remote Controller
Button Functions
09 10
Power indicator
Power adapter jack
Positive recharging pole
Danger of high voltage! Caution! Electric
Shock! Dry your hands before operation!
Infrared signal
emission window
Negative
recharging pole
Fig. 1
Fig.1
Fig. 2
Fig.2 Fig.3
Fig. 3
Using the Auto-Charging Dock Station
1
. P
lace the auto-charging dock station onto a flat, smooth surface and against a wall in an
area close to an electrical outlet. Peel off the adhesive covers
on the bottom to fix the
dock station in place.
2. Ensur
e that there are no obstacles or uneven surfaces within 6 feet
in front of and 3 feet
to either side of the docking station.
3. If the infrared signal emission s
urface of the docking station is
blocked, the cleaner will be
unable to return to the docking station for charging
.
4. Keep the AC Adapter power cord away
from
the front and the sides of the docking station
so that the cleaner will be able to locate and return to the station.
Attention
Place two AAA batteries to use the remote controller. (As shown
in Fig. 2)
When c
ontrolling the cleaner with the remote controller, aim the
controller at the sensor head of the cleaner, and keep it within 5M
from the cleaner.
1.
2.
1m
1m
" and the cleaner will start leftward movement.
" and the cleaner will start rightward movement.