User's Manual

Elster American and Itron Commercial Meter Installation
5. Secure with the four mounting screws from the adapter kit. Tighten the mounting screws in a diagonal
alternating pattern.
• Insert the first screw and tighten enough to hold the index in place.
• Insert the second screw and tighten two to three turns.
• Insert the third mounting screw and tighten two to three turns.
• Insert the fourth mounting screw and tighten.
6. Tighten the first, third and second screw using an alternating tightening pattern. Turn each screw 1/4 to
1/2 turn after the screw contacts the index cover. Tighten each index mounting screw evenly. If you have
access to a torque-driver, tighten mounting screws to 20 to 25-inch pounds.
7. Insert tamper seals in the tamper seal cups on the index cover and press into place with an 11/32 nut driver
or similar blunt tool.
This completes installation of the commercial AMR module on the Itron commercial meter.
TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 74
Proprietary and Confidential