User's Manual

Sensus Commercial Meter Installation
The 100G DLS ERT modules support enhanced security with the Itron Security Manager. Enabling
command or enhanced security requires additional programming. Program the 100G DLS ERT modules
using:
• An FC200SR handheld computer with Field Deployment Manager (FDM) software version 3.3 or higher
or
• An FC300 with SRead handheld computer with Field Deployment Manager (FDM) software version 3.3
or higher
or
• A 900MHz Belt Clip Radio with Field Deployment Manager (FDM) software version 3.3 or higher and a
customer-supplied laptop. The Belt Clip Radio connects to the user-supplied laptop using a USB cable or
Bluetooth.
To enable enhanced security and for more complete programming information, see the Field Deployment
Manager Endpoint Tools Mobile Application Guide (TDC-0934).
FC200SR FC300 with SRead 900MHz Belt Clip Radio
Caution You must program the 100G commercial ERT module before use.
Take note of the index drive rate shown on the index. The ERT is programmed based on the drive rate. Sensus
commercial meter index drive rates may be 5-, 10- or 100-cubic feet. The seven-dial index shown is a 100-
cubic feet drive rate.
TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 77
Proprietary and Confidential