User's Manual

Itron Meter Installation
2. Attach the 100G assembly to the meter. The Sprague adapter plate has tag mounting holes in the lower left
and right corners. Secure the meter tag to one of the holes with a utility-approved and provided security
seal.
Method 1: Attach the meter tag to the adapter plate tag mounting hole
Method 2: Attach the meter tag to the 100G mounting hole
Note If the brass meter tag will be secured to the meter utilizing the ERT-to-meter mounting hole, it must
be attached during the 100G series gas ERT module installation procedure described in Step 1 of
Attaching the ERT Module Assembly on the Meter on page 35.
Caution A protruding brass meter tag can present a safety concern particularly if the tag is damaged with
sharp edges protruding from the meter.
Method 3
1. Remove the 100G index cover.
2. Place the meter tag inside the ERT assembly for optimal meter tag security. (See To assemble the ERT
module and index on page 32.)
Method 3: Place the brass meter tag inside the ERT module assembly
TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 41
Proprietary and Confidential