User's Manual

About the 100G Gas ERT Module
• Installation tools (provided by installer or customer).
• Small and medium flat-blade or Phillips screwdrivers.
• Side-cutting pliers/wire snips.
• Small putty knife.
• Meter seals, wire seal, and seal press.
• 11/32-inch nut driver or other blunt tool.
• Itron programming device:
FC200SR handheld computer with Field Deployment Manager (FDM) software
or
FC300 with SRead with Field Deployment Manager (FDM) software
or
900 MHz Belt Clip Radio with Field Deployment Manager (FDM) and a customer-supplied laptop
Note The FDM version required is dependent upon the 100G ERT module model in use.
• Replacement screws:
Replacement Screws
Meter To mount the 100G series
gas ERT module on the
meter:
Itron Part
Number
To mount the index on the 100G
series gas ERT module housing:
Itron Part
Number
Elster American 1/4 - 20 x 5/8" slotted, Fillister
head
8 - 32 x 3/16" slotted, Fillister head
Sensus/Rockwell 10 - 24 x 5/8" slotted, Fillister
head
6 - 32 x 5/8" slotted, Fillister head
Itron/Sprague
Sprague/Schlumberger 175
RM
10 - 24 x 5/8" slotted, Fillister
head
10 - 24 x 1/2-inch, slotted
Fillister head
SCR-0175-002
10 - 24 x 3/8" Fillister head 010040-002
National/Lancaster 10 - 24 x 3/4" Phillips, flat-
head, stainless steel
SCR-0014-004 10 - 24 x 3/8" thread-forming, Phillips
pan-head to mount indexes with legs
6 - 19 x 3/8" thread-forming, Phillips,
Fillister head to mount indexes with
screw holes
SCR-0017-001
SCR-0037-001
Commercial Meter To mount the 100G
commercial ERT on the
meter:
Itron Part
Number
To mount the index (and index
assembly, if applicable) on the
100G commercial ERT housing:
Itron Part
Number
Elster American 2A x 3.35" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-001 12 - 24 x 1/2" slotted, Fillister head
machine screws, drilled to accept utility-
approved wire seals
Sensus 2A x 3.63" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-002 2A x 2.94" length, slotted round-head SCR-0062-003
Rockwell For Aluminum Box Direct
Reading (VDR) index only
SCR-0062-001
TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 15
Proprietary and Confidential