User's Manual Part 2

100G Datalogging Installation Guide - Direct Mount 31

This chapter provides instructions to install the 100G Datalogging Gas Endpoint on an

Itron/Actaris Meter.

Note Itron/Actaris meters are also known as Sprague and Schlumberger meters.

For these instructions, all meters will be referred to as Itron/Actaris meters.

To remove the index from the meter

1. Remove the index cover screws and the index cover from the Itron/Actaris meter.

Examine the mounting screws. If they are 5/8" long and not corroded, keep them to re-

attach the 100G Datalogging Gas Endpoint assembly. If the screws are not the correct

length or if the screws are corroded, discard.

Note Use the removed index cover as a temporary storage container for

screws. Properly dispose all unused screws, old index covers, gaskets, tamper

seals, and other leftover materials. Do not leave materials on customer premises.

HAPTER

Itron/Actaris Meter Installation