User's Manual Part 2

Chapter 4 Itron/Actaris Meter Installation
44 100G Datalogging Installation Guide - Direct Mount
To Secure Brass Meter Tags to Flat-faced Meters
1. After the metal index cover is removed from the meter, carefully remove the brass
meter tag from the meter index cover. Do not damage the meter tag mounting holes.
The Itron Adapter Shim Plate was designed with a tag mounting hole in the lower
right corner. After the 100G Datalogging Gas Endpoint assembly is attached to the
meter, secure the meter tag to the Shim Plate meter tag mounting hole with a utility-
approved wire security seal. Itron acceptable meter tag mounting methods are shown
in the photos.