User's Manual Part 2

Attaching the 100G Datalogging Gas Endpoint Assembly to the Itron/Actaris Meter
100G Datalogging Installation Guide - Direct Mount 45
2. If the meter tag mounting holes were damaged during removal so a wire security seal
cannot be used, remove the 100G Datalogging Gas Endpoint index cover and place
the meter tag inside the endpoint assembly to maintain meter security. (See To
Assemble the 100G Datalogging Gas Endpoint on page 32.)
Warning Placing the brass meter tag inside the 100G Datalogging Gas
Endpoint assembly is not the preferred method of securing the tag to the meter.
Use this method only if the brass meter tag mounting holes are damaged and
cannot be used for mounting. This method does not secure the tag inside the
endpoint. The brass meter tag may move out of view if the meter is bumped or
jarred.