User's Manual Part 3

Chapter 6 Elster American and Itron Actaris Commercial Meter Installation
70 100G Datalogging Installation Guide - Direct Mount
2. Place the extension driver on the 100G Datalogging Commercial Gas Endpoint
wriggler.
3. Align the index wriggler with the commercial 100G Datalogging Commercial Gas
Endpoint wriggler driver extension.
4. Install the two index mounting screws. Tighten the first screw two or three turns.
Install second screw and tighten to secure. Tighten the first screw to a snug fit. Each
index mounting screw must be tightened evenly.