User's Manual Part 3

100G Datalogging Installation Guide - Direct Mount 73

This chapter provides instructions to install the 100G Datalogging Commercial Gas

Endpoint on a Commercial Sensus/Rockwell diaphragm meter.

Removing the Index/ Index Assembly from the Meter

100G Datalogging Commercial Gas Endpoints can be mounted on Sensus/Rockwell

Commercial Meters in various configurations. These instructions show the index assembly

mounted without a mounting plate.

Note Sensus/Rockwell diaphragm commercial meters do not require an index

assembly mounting plate. Indexes can be mounted directly to the endpoint.

To Remove the Index/Index Assembly from the Meter

1. Remove any tamper seals (or wire seals) from the index cover and remove the index

cover mounting screws. You will re-install it later in these instructions.

HAPTER

Sensus/Rockwell Commercial Meter Installation