User's Manual Part 3

Chapter 7 Sensus/Rockwell Commercial Meter Installation
78 100G Datalogging Installation Guide - Direct Mount
5. Install the index cover. For index covers with flat-surface screw holes, use screws
(SCR-0062-002), flat washers (WSH-0020-005), and cork washers (WSH-0032-001).
For index covers with tamper seal cups, use screws, (AS-568A-011, 5/16" ID x 7/16
OD) o-rings, and tamper seals.
6. Place new tamper seals over screws (if mounting plate has tamper seal cups) and press
into place with an 11/32" nut driver or similar blunt tool. If your mounting assembly
requires a utility-approved wire seal, pass wires through holes in the screw heads and
crimp the approved wire seal.