User's Manual Part 3

100G Datalogging Installation Guide - Direct Mount 81
This chapter provides the instructions to mount 100G Datalogging Gas Endpoints
(residential and commercial) on Dresser ROOTs Commercial Rotary Meters.
Some commercial AMR applications require a Dresser ROOTS Rotary Meter with a
residential 100G Datalogging Gas Endpoint. Only Elster American version residential 100G
Datalogging Gas Endpoints are compatible with Dresser ROOTS series rotary gas meters.
This chapter provides the instructions to mount an Elster American residential 100G
Datalogging Gas Endpoint on Dresser ROOTS AMR-ready Rotary Commercial Meters.
Installation requires an AMR adapter kit supplied by Dresser. Refer to the Meter
Compatibility List on page 2 for Dresser AMR adapter kit part numbers.
Installation Prerequisites
Materials Supplied By Itron
• 100G Datalogging Gas Endpoint
• New tamper seals - if applicable
Materials Supplied by You
• AMR-ready Dresser ROOTS Rotary Meter
• Adapter Kit from Dresser
Note Follow the Dresser Field Installation Instructions to modify the AMR-ready
Dresser ROOTS Meter for 100G Datalogging Gas Endpoint installation. Contact
Dresser distributor or Dresser representativ
e for installation instructions specific to
the required AMR adapter kit.
C
HAPTER
8
Dresser ROOTS Commercial Rotary Meter Installation