User's Manual Part 3

Chapter 8 Dresser ROOTS Commercial Rotary Meter Installation
90 100G Datalogging Installation Guide - Direct Mount
Installing the 100G Datalogging Commercial Gas Endpoint on
a Dresser ROOTS Rotary Meter
The information in this section guides you through the installation of the 100G Datalogging
Commercial Gas Endpoint on Dresser ROOTS rotary meters.
Note A Dresser ROOTS rotary gas meter with an instrument drive is required for
this installation procedure. These instructions show an Elster American 100G
Datalogging Commercial Gas Endpoint. The installation procedure is the same
for
the Sensus/Rockwell 100G Datalogging Commercial Gas Endpoint.
100G Datalogging Elster American 100G Datalogging Sensus/Rockwell
Commercial Gas Endpoint Commercial Gas Endpoint
Installation Requisites
Installation requires the following items:
Drive cover kit
100G Datalogging Commercial Gas Endpoint
A flat, slot-drive screwdriver