User's Manual

Electronic Volume Corrector and Instrument Installation
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 47
Proprietary and Confidential
To attach the ERT module to the IMC\W2 and MC2
1. Insert the 8-32 x 7/16-inch screw (A) into the top of the mounting bracket. Insert the two 8-32 x 3/4-inch
screws (B) into the bottom of the mounting bracket.
2. Insert one 3/32-inch nut on the top 7/16-inch bracket screw (A). Slide the 100G Datalogging FN remote
ERT module mounting lug over the top of the bracket screw and nut.
3. Secure the bottom 100G Datalogging FN remote ERT module mounting holes over the two 8-32 x 3/4-
inch screws with the remaining two 8-32 nuts.