User's Manual

Sensus Sonix Meter Installation
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 77
Proprietary and Confidential
Programming the 100G Datalogging FN Remote ERT Module
Caution You must program the 100G Datalogging FN remote ERT module
before use. Follow the steps in this section to properly program the ERT module.
Program the 100G Datalogging FN remote ERT modules using:
A FC200SR handheld computer with Endpoint-Link
®
or Endpoint-Link Pro version 5.3 or higher or Field
Deployment Manager (FDM) software version 1.1 or higher
or
A FC300 with SRead handheld computer with Endpoint-Link or Endpoint-Link Pro version 5.5 or higher
or Field Deployment Manager (FDM) software version 1.1 or higher
or
A 900MHz Belt Clip Radio with Endpoint-Link version 5.5 or higher or Field Deployment Manager
(FDM) software version 1.1 or higher and a customer-supplied laptop. The Belt Clip Radio connects to the
user-supplied laptop using a USB cable or Bluetooth.
See the Endpoint-Link v5.3 (or higher) Endpoint Programming Guide (TDC-0744) or the Field
Deployment Manager Endpoint Tools Mobile Application Guide (TDC-0934) for more complete
programming information.
FC200SR FC300 with SRead 900MHz Belt Clip Radio