User's Manual

C HAPTER 2
Installing the 100G Remote ERT Module
The 100G Remote ERT Module can be mounted on a pipe, using the pipe bracket
installation kit, or a flat surface. The 100G Remote ERT Module must always be mounted
with the printed label right-side-up, and the encoder wires and tamper seals at the bottom, as
shown.
Top of ERT
Cable comes
out the bottom
Tamper seals at
the bottom
Mount the Corrector
Mount the corrector on the meter according to the Mercury installation manual.
Enter the specified code settings for the corrector.
Natural Gas Solutions 100G Installation Guide for Mercury Electronic Volume Correctors 7
DRAFT