User's Manual

Installing the 100W-R and 100WP-R Endpoints
TDC-0951-001 100W-R and 100WP-R Datalogging Water Endpoint Installation Guide 31
Proprietary and Confidential
2. Installation requires a 100W-R endpoint for an InVISION or Scancoder register. Installation for a Digital
register requires a 100WP-R.
3. Strip 1/2-inch of insulation from the end of the brown, gray, and yellow wires.
4. Place the endpoint on the mounting bracket and route the yellow, gray, and brown wires through the
opening.
Note A gasket is not required.