User's Manual

Table Of Contents

Chapter 5 Sensus Meter Installation

26 2.4GZ OpenWay Gas Module Installation Guide

Preinstallation Preparations

Before installing the 2.4GZ OpenWay Gas Module on a meter, verify that:

• All Itron gas modules are 2.4GZ OpenWay Gas Modules for your brand of gas

meters.

• The model numbers of all meters on which the 2.4GZ OpenWay Gas Modules will be

installed are included in the Meter Compatibility List.

Installing the 2.4GZ OpenWay Gas Module

There are four major steps to installing the 2.4GZ OpenWay Gas Module on a meter:

• Remove the index

• Assemble the 2.4GZ OpenWay Gas Module

• Program the 2.4GZ OpenWay Gas Module

• Attach the 2.4GZ OpenWay Gas Module to the meter.

NOTE Properly dispose of all unused screws, old index covers, gaskets, tamper

seals, and other left-over materials. Do not leave any materials on customer

premises.

Remove the Existing Index

The first major step when installing a 2.4GZ OpenWay Gas Module on a Sensus meter is to

remove the existing index from the meter.

To Remove the Index

1. Remove any tamper seals from the meter.

2. Detach the index cover from the meter by removing the four screws holding it in

place.