Installation Guide
Table Of Contents
- Cellular 500G Module Remote Mount Installation Guide
- Contents
- New in This Document
- 1 Introduction
- 2 Mounting
- 3 Programming
- 4 Specific Meter Manufacturer Installation
- 5 Using Gel-cap Connectors to Complete Wiring Connections
- 6 Optional Sealant Application Instructions
- A Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
Programming Example
Endpoint programmed for 6 dial, 1000 cubic feet (CCF).
1. Enter the initial index read. For this example, the initial read is 123456 where 6 = 600 cubic
feet. After the initial programming, an endpoint read will result in a reading of 1234560
where the least significant digit is in 10’s of cubic feet. Since counting is with a drive rate of
1000 cubic feet and the reading is transmitted in 10’s of cubic feet, the last two digits of the
reading will not change.
2. Program the endpoint to 123456.
3. Read the endpoint. The result should be 1234560 with the zero added to put the reading in
10’s of cubic feet.
4. Add one count. The result should be 1234660. Notice that the last two digits of 60 do not
change.
Mercury X-Blank Options
Endpoints (modules) can be programmed with one of the Mercury X-Blank options. There are
1, 2, 3, and 4 blank options available. Blank options are set up as a what-you-see-is-what-you-
get (WYSIWYG) configuration. The values are not set in cubic feet or cubic meter standards.
The Mercury X-Blank options are used in configurations where the system receives pulses
from a corrector or instrument that can change pulse values and has configurable display
digits. The Mercury-X Blank options allow users to program the endpoint to match the
configuration of the corrector or instrument.
Cellular 500G Module Remote Mount Installation Guide 3 Programming
October 11, 2021 815-0622-00 REV 000 Itron, Inc. Page 21 of 99
DRAFT