Installation Guide
Table Of Contents
- Cellular 500G Module Remote Mount Installation Guide
- Contents
- New in This Document
- 1 Introduction
- 2 Mounting
- 3 Programming
- 4 Specific Meter Manufacturer Installation
- 5 Using Gel-cap Connectors to Complete Wiring Connections
- 6 Optional Sealant Application Instructions
- A Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
6. Connect the twisted blue and white wires to terminal 2 on the K1 terminal port.
Programming and Requirements Notes
Important! This information is subject to change without notice. Refer to the Eagle
Research product documentation to verify the most current programming and
configuration information for the Cellular 500G.
Using Itron Cellular 500Gs with Eagle Research volume correctors requires Eagle Research
Field Manager software configured with the parameters for your model of Eagle Research
corrector.
Cellular 500G Module Remote Mount Installation Guide 4 Specific Meter Manufacturer Installation
October 11, 2021 815-0622-00 REV 000 Itron, Inc. Page 39 of 99
DRAFT