Installation Guide

2. Connecting the module to the corrector. Installation requires the following materials:
–
Connection options, Cannon cable (part number: 43-035-40*) pigtail option
–
Romet AdEM communication cable, available from Romet
–
RometLink communication software, available from Romet
–
Three gel cap connectors, Itron part number CON-0023-001
–
3M crimping tool
–
Torx T-10 screwdriver
–
Cellular 500G with backplate and four included Torx screws (included with module)
3. Mounting the Cellular 500G (for more information, see Mounting on page 12). Select the
mounting option appropriate for your installation. Mounting options include:
–
Wall mount on a sheet metal surface
–
Pipe mount using the Itron pipe mount kit CFG-0005-003
–
Custom Romet mounting (see Romet documentation for custom mounting)
4. Programming the Cellular 500G. For programming information, see Programming on page
18. Programming requires an Itron programming device (for example, an FC300SR).
Mounting Instructions
Romet ECM2 to Cellular 500G mounting option
Note: This mounting option requires a Romet mounting kit (Romet part number 34-444-1-
KIT).
1. Remove the module screw from the back of the ECM2 meter.
Cellular 500G Module Remote Mount Installation Guide 4 Specific Meter Manufacturer Installation
October 11, 2021 815-0622-00 REV 000 Itron, Inc. Page 79 of 99
DRAFT