Installation Guide
Table Of Contents
- Cellular 500G Module Remote Mount Installation Guide
- Contents
- New in This Document
- 1 Introduction
- 2 Mounting
- 3 Programming
- 4 Specific Meter Manufacturer Installation
- 5 Using Gel-cap Connectors to Complete Wiring Connections
- 6 Optional Sealant Application Instructions
- A Important Safety and Compliance Information
- U.S. and Canadian Patent Numbers
- USA, FCC Part 15 Spectrum Compliance
- Modifications, Repairs, Installation, and Removal
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Transportation Classification
- Lithium Battery Safety
- Equipment Repairs
- Intrinsic Safety
- Electrostatic Ignition Hazard
- Module Cleaning
- Do Not Drop
.
4. The connector is properly crimped when the top of the moveable yellow center (1) is flush
with the top of the connector body (2).
Warning! Crimping the connector forces sealant out of the connector. The
sealant protects the inside of the connector against insects, moisture, or other
contaminants. The sealant may cause minor eye and skin irritation. Avoid eye
contact. For more information or Safety Data Sheet (SDS) information, visit the
manufacturer website.
Cellular 500G Module Remote Mount Installation Guide 5 Using Gel-cap Connectors to Complete Wiring Connections
October 11, 2021 815-0622-00 REV 000 Itron, Inc. Page 93 of 99
DRAFT