Users Manual

CAT2 Communications Module
Miscellaneous
The user’s manual for any product that contains this module will contain the following text:
Professional Installation
This module is intended for professional installation by the integrator. The OEM integrator is still responsible for the
FCC/ISED compliance requirement of the end product, which integrates this module.
Limited Modular Procedures
The Itron CAT2 is approved as a module, and Itron as the module manufacturer is responsible for approving the host
environment that the limited module is used with. The host for the Itron CAT2 module is the Itron OW CAT-M1
electricity meter. Itron has full control over the manufacture of the module as well as the OW CAT-M1 meter. As a
module the fully operational CAT2 has been tested and has shown compliance within the host (OW CAT-M1).
Antennas
There are no external antenna types approved for use with the Itron CAT2 module installed in the OW CAT-M1.Below
are the antennas associated with the CAT2 module.
• PCB embedded strip, 4.57 dBi max gain (2.4 GHz to 2.5 GHz)
• PCB mounted inverted F, 2.58 dBi max gain (746 MHz to 2.155 GHz)
For situations where the host manufacturer is responsible for an external connector, the integration instructions shall
inform the installer that a unique antenna connector must be used on the Part 15 authorized transmitters used in the host
product.
Modification and Repairs
To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed
or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority
to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by
unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted.
Unauthorized repair will void the warranty and/or maintenance contract with your company.
Operational Description
The Itron CAT2 is a communications module which utilizes a 2.4 GHz Wi-Fi transmitter plus a cellular
modem. This module operates within a host unit which is part of a utility network system designed to communicate with
other devices in this network such as electricity meters and routers. The module operates on AC voltage which is supplied
by the host device.
Test Modes
Itron uses various test mode programs for test set up which operate separate from production firmware. Host integrators
should contact Itron for assistance with test modes needed for module/host compliance test requirements.
Recycling Information
The product you have purchased contains circuit boards. At the end of the modules useful life, under various state
and local laws, it may be illegal to dispose of certain components into the municipal waste system. Check with your
local solid waste officials for details about recycling options or proper disposal.