User's Guide
Table Of Contents
- ContentsTable of Contents
- 1 Itron Mobile Radio Compliance
- 1 Introduction
- 2 About Your Itron Mobile Radio
- 3 Daily Operation
- 4 LED Status Indicators
- 5 Communication Ports
- 6 Carrying the Portable Itron Mobile Radio
- 7 Installing the IMR-FT
- 8 Maintaining your Itron Mobile Radio
- 9 Storing Your Radio
- 10 Battery Basics
- 11 Safety
- 12 Troubleshooting
- 13 Optimizing Bluetooth® Performance
- 14 Itron Mobile Radio Capabilities and Limitations
8
Maintaining your Itron Mobile Radio
Your Itron Mobile Radio is rugged and water-resistant. However, you should take the following
precautions to ensure that it gives you many years of reliable service.
■
Do not subject the radio to extreme temperatures, such as leaving it in a vehicle in bright
sunlight. For more information, see Battery Best Practices List on page 40.
■
Do not leave it in damp or dusty places.
■
Do not drop your radio or subject it to severe impacts.
■
Do not use products containing DEET near the Itron Mobile Radio. DEET will degrade the
radio's casing. DEET is a common ingredient in many insect repellents.
■
When installing or replacing the battery, make sure to follow the provided instructions to
maintain water tightness.
■
Use the rubber flap to protect the radio’s USB port in dusty conditions.
■
Protect the antenna and power connectors on the IMR-FT charge base when the radio is
being installed, removed, or carried.
■
The IMR-FT charge base is not water resistant. Protect it from rain and moisture.
■
Ensure that the IMR-FT external antenna whip is securely connected to its mounting base.
Cleaning the Radio Case
To clean the radio case:
1. Wipe the radio’s case with a damp cloth.
2. Use a soft-bristle brush to remove stubborn deposits.
3. Blow any water out of the connector and then leave the radio to drain and air-dry.
Caution: Never use solvents of any kind on the case. Do not expose it to
temperatures above 140° F (50° C).
01 September 2020 815-0410-00 32