User's Guide
Table Of Contents
- ContentsTable of Contents
- Itron Mobile Radio Compliance
- 1 Introduction
- 2 About Your Itron Mobile Radio
- 3 Daily Operation
- 4 LED Status Indicators
- 5 Communication Ports
- 6 Carrying the Portable Itron Mobile Radio
- 7 Installing the IMR-FT
- 8 Maintaining your Itron Mobile Radio
- 9 Storing Your Radio
- 10 Battery Basics
- 11 Safety
- 12 Troubleshooting
- 13 Optimizing Bluetooth® Performance
- 14 Itron Mobile Radio Capabilities and Limitations
Figure 1Mounting Jacket
Figure 1 shows the plastic side release buckles and straps, used to secure the IMR-FT within
the Mounting Jacket. Inside the Mounting Jacket is the Velcro seatbelt retaining flap, used to
secure the Mounting Jacket onto a lap seatbelt. This allows for easy temporary installation of
the IMR-FT in the vehicle and easy removal.
Figure 2Cable Retaining Flap
Figure 1 shows the Velcro cable retaining flap on the side of the Mounting Jacket, used to
hold the micro-USB cable securely in place once it is plugged into the installed IMR-FT.
Figure 3Mounting Jacket and Mounting Plate
19 October 2021 815-0410-00 REV 001 29
Itron Mobile Radio User Guide Chapter 7 Installing the IMR-FT