Installation Guide

Chapter 4 Installing the OpenWay Riva Gas
Remote Disconnect
This section describes OpenWay Riva Gas Remote Disconnect installation. Installation
requires initial calibration and alignment using an Itron handheld device loaded with Field
Deployment Manager Endpoint Tools Enhanced.
OpenWay Riva Gas Remote Disconnect installation,
commissioning, and decommissioning
This section provides the information to physically install, connect, commission,
decommission, and disconnect the OpenWay Riva Gas Remote Disconnect.
Warning: These instructions are suggested when Itron-approved utility or installer
company-established valve installation procedures and practices are not available.
Itron does not endorse or warrant the completeness or accuracy of any third-party
valve installation procedures or practices, unless otherwise provided in writing by
Itron. Follow your company's standard operating procedures regarding the use of
personal protection equipment (PPE). Adhere to guidelines issued by your company
in addition to those given in this document when installing or replacing valves.
This product, as of the date of manufacture, is designed and tested to conform to all
governmental and industry safety standards as they may apply to the manufacturer.
The purchaser/user of this product must comply with all fire control, building codes,
and other safety regulations governing the application, installation, operation, and
general use of this valve to avoid leaking gas hazards resulting from improper
installation, startup, or use of this product.
To ensure safe and efficient operation of this product, Itron strongly recommends
installation by a qualified professional.
OpenWay Riva Gas Remote Disconnect accessories
This section provides a list of the accessories available for the OpenW
ay Riva Gas Remote
Disconnect.
Description Itron part number
Valve tool MSC-5103-003
Universal environmental cap MSC-0019-011
OpenWay Riva Gas Remote Disconnect Installation Guide TDC-1759-000 11
Proprietary and Confidential