Installation Guide
Table Of Contents
- Contents
- Important Safety and Compliance Information
- USA, FCC Part 15 spectrum compliance
- Canada, ISED spectrum compliance
- RF Exposure (FCC/ISED)
- Electromagnetic compatibility
- Telemetering equipment classification
- Intrinsic safety
- Lithium battery
- Transportation classification
- Modifications, repairs, installation, and removal
- Aluminum enclosure
- Electrostatic discharge
- Electrostatic ignition hazard
- Device cleaning
- Do not drop
- Product notification
- OpenWay Riva Gas Remote Disconnect Installation Guide Overview
- About the OpenWay Riva Gas Remote Disconnect
- Installing the OpenWay Riva Gas Remote Disconnect
- Connecting the Flood Sensor to the OpenWay Riva Gas Remote Disconnect
- OpenWay Riva Gas Remote Disconnect Operations
After an Override action is performed, all future valve closure or arming requests will result
in an override warning and a corresponding logged event.
2. Connect
Continue the OpenWay Riva Gas Remote Disconnect deployment by connecting the device.
This process prepares the valve for opening by a qualified installer or technician.
Connect instructions
1. Using the programming device loaded with FDM Tools, select number 2, Connect.
2. Click Next.
3. Enter the OpenWay Riva Gas Remote Disconnect device ID.
4. Click Next.
Warning: A Confirm Valve Arming screen appears.
Respond to the warning to continue the operation. You must wait for the Valve
Status screen to appear before you turn the shaft to open the valve.
OpenWay Riva Gas Remote Disconnect Operations
OpenWay Riva Gas Remote Disconnect Installation Guide TDC-1759-000 23
Proprietary and Confidential