Datasheet

37
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Typical Nomenclature: TN 7S24 - 1219 P1 B
Series
TN = Trident Neptune
Shell Style
0 = Flange Receptacle (4 holes)
6 = Plug
7 = Jam Nut Receptacle
Sealing Class
G = Grommet, no nut
L = Large Grommet, extender and nut
(Size 24-0048
only, Jam Nut Receptacle not supported )
S = With Grommet and nut
U = Unsealed
Modification
* = Standard
01= Jam Nut Receptacles bulk
packages are delivered without nut
See page 50 for Spare Jam Nuts
Packaging
B = Bulk (100 pcs)
L=Single Pack
Connector Finish Materials
1 = Standard (Nickel Plated Metal Parts)
2=Plastic Coupling Nut
(TN plug shell
sizes 16 and 24 only)
Contact Type
P = Pin
S=Socket
Shell Size and Contact Arrangement
Shell Size
Number of
Power Contacts
Number of
Signal Contacts
14 - 00 12
16 - 00 19
16 - 02 13
24 - 12 19
24 - 04 20
24 - 04 28
24 - 00 48
Test Method Criteria of Acceptance
Dielectric Withstanding Voltage 2000 V ac No breakdown
Thermal Shock -55°C to +120°C (-67°F to +248°F) No physical damage
Physical Shock 40 g’s peak, 3 axes, No physical damage.
6 millisecond duration half-sine pulse No loss of continuity >10 sec
Vibration 10 g’s peak,10-500 Hz No physical damage,
No loss of continuity >10 sec
Durability 500 cycles of mating and unmating, No mechanical or
500 mating cycles max electrical defects
Salt Spray 48 hours Shall be capable of mating and unmat
ing and meet contact resistance
requirements
High Temperature Endurance 1000 hours at 85°C (+185°F) Insulation Resistance > 100 MW
250 hours at 120°C (+248°F)
Humidy Steady State RH 90-95%, 40°C (+104°F), 504 hours Insulation Resistance > 100 MW
The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts.
Variations may affect this data, so please consult factory for further information on your requirements.
Test Specifications
01
How to Order-Connectors
Neptune Circular Connectors
Cannon Trident Connectors