Datasheet

www.ittcannon.com

Dimensions shown in mm (inch)

Specifications and dimensions subject to change

Standard Plug

for Pin Contacts

• Mates with Standard Receptacles, see page 30.

• Accepts pin contacts, see page 64.

• Discriminating (Keying) Pins available, see page 73.

• Can be water sealed to IP65.

Shell Number of Dimensions Accessory

Size Contacts Part Number Nomenclature ØA ± 0,20 (.008) B max. ØC ± 0,15 (.005) ØD ± 0,15 (.005) E Thread

10 4 192922-1250 TR1004PMS1NB 21,60 (.850) 31,80 (1.252) 10,90 (.429) 12,20 (.480) 19,10 ±0,20 (.751 ±.007) 9/16 - 24 UNEF

12 8 192922-1260 TR1208PMS1NB 24,80 (.976) 31,80 (1.252) 13,80 (.543) 15,10 (.594) 19,10 ±0,20 (.751 ±.007) 11/16 - 24 UNEF

14 12 192922-1270 TR1412PMS1NB 28,00 (1.102) 31,80 (1.252) 17,00 (.669) 18,30 (.720) 19,10 ±0,20 (.751 ±.007) 13/16 - 20 UNEF

16 19 192922-1280 TR1619PMS1NB 31,20 (1.228) 31,80 (1.252) 19,90 (.783) 21,40 (.842) 19,10 ±0,20 (.751 ±.007) 15/16 - 20 UNEF

18 7 192990-1330 TR1807PMS1NB 34,30 (1.350) 33,00 (1.299) 22,50 (.885) 24,00 (.944) 19,10 ±0,20 (.751 ±.007) 11/16 - 18 UNEF

18 23 192990-1320 TR1823PMS1NB 34,30 (1.350) 31,80 (1.252) 22,40 (.881) 24,00 (.944) 19,10 ±0,20 (.751 ±.007) 11/16 - 18 UNEF

20 28 192922-1290 TR2028PMS1NB 37,50 (1.476) 31,80 (1.252) 25,60 (1.007) 27,10 (1.066) 19,10 ±0,20 (.751 ±.007) 13/16 - 20 UNEF

22 35 192922-1300 TR2235PMS1NB 40,70 (1.602) 31,80 (1.252) 28,50 (1.122) 30,40 (1.196) 19,10 ±0,20 (.751 ±.007) 15/16 - 18 UNEF

24 48 192990-1340 TR2448PMS1NB 43,90 (1.728) 31,80 (1.252) 31,70 (1.248) 33,50 (1.318) 14,72 ±0,15 (.580 ±.006) 17/16 - 18 UNEF

Ringlock Circular Connectors

Cannon Trident Connectors

Single Piece Connector

Note: For versions with plastic locking ring, please consult the factory.

IMPORTANT NOTE: Standard and Reversed Format

Equipment design dictates whether the fixed connector is “live” or “dead” when

disconnected. Connector housings are available that

provide socket contacts on the live side of the equipment.

Standard Format: Receptacle with socket contacts.

Reversed Format: Receptacle with pin contacts.

Standard and Reversed connectors are not intermateable.