DP27 USER' S MANUAL
Congratulations on purchasing our high quality product. Please read the manual carefully to find out all features and how your telephone works, so you can get the best out of your new phone. Safety Precautions To reduce the risk of electrical shock and injury, please follow these basic safety precautions before using the phone. 1. Carefully read and observe the instructions in this manual. 2. Follow all warnings marked on the unit. 3. When cleaning, unplug the phone first, then use a damp cloth to wipe.
Base 3 AAA Ni-MH batteries Handset Adapter* User's manual Line cord* *The shape of the plugs can vary according to each country's specification.
Volume Control Tone Control Amplify Button Headset Jack Base Rear View Phone Line Jack Charge pins Keys Description Power Jack Page button
Dial/Speaker key Make/Answer a call. Activates the speakerphone if pressed during a call. End/Power key End a call. Long press to activate power on/off, as described in par. Turning Handset On/Off. Navigation key: Up/CID key Scroll up through lists and menu options. Increase the earpiece/speakerphone volume during a call. Enter the CID book, as described in par. CID Book. Down/Phonebook key Scroll down through lists and menu options. Decrease the earpiece/speakerphone volume during a call.
Redial key Enter the redial book, as described in par. Last Number Redial. Insert a pause when pre-dialing a number. Left/Right soft key Perform the functions indicated by the text immediately over it (on the bottom line of the display) which changes time by time. Star key Press and hold to turn on/off keypad lock function. Set up a conference call, as described in page 40. One-touch memories You can store 3 numbers in One-touch memories (M1, M2 and SOS).
Shaker Icon Indicates the shaker and visual ringer is enabled. Signal Icon Indicates whether the current signal exists or not. If the handset is too far from the base, this icon will blink on the LCD. Alarm Icon This icon appears when you set an alarm to ring at a specified time. Keypad Lock This icon appears when the keypad is locked. Connecting Lines 1. Connect one end of the phone line cord to the phone line jack of the base, and the other end to a standard phone wall outlet.
3. To replace the battery cover, slide the cover up until it snaps in place. Notes: Reversing the orientation may damage the handset. The batteries need to be replaced if they do not recover their full storage capacities after recharging. When replacing the batteries, always use good quality Ni-MH re-chargeable batteries. Never use other batteries or conventional alkaline batteries. Charging Handset ! Important Note: Before initial operation, YOU SHOULD FULLY CHARGE THE HANDSET for about 15 hours.
Turning Handset On/Off If the handset is in power off mode, when you place the handset on the base, it automatically turns on. To turn the handset on or off in standby mode, follow these steps: 1. To turn on the handset when it's off, press and hold the key until you switch the display on. On power up, the handset will enter subscription mode and search for a registered base. A message as shown below will be displayed to the user, and the signal icon will flash. 2.
Note: To make a call to the last number you dialed, use the Redial feature. For details, see par. Last Number Redial. You can enter the desired phone number in standby mode, which allows you to make corrections before dialing. Follow these steps: 1. Enter a telephone number (up to 32 digits). Check it. You can also use the key to insert a pause. Note: If you make a mistake while entering a number, press the Erase soft key to clear the last digit. key. 2.
Example: You want to say something to another person in the room but do not want the other party to hear you. To mute your microphone, press the Mute soft key during the conversation. The "Call Muted" appears on the LCD. To unmute the microphone, press the Mute soft key again. You will restore the normal condition. Amplification Function Your phone is equipped with a specialized amplification function designed to fit your needs.
Note: If you set the volume to "Off", when a call comes in, only the New Call information appears on the LCD. Last Number Redial 1. Press the key or the Redial soft key in standby mode.in standby mode. Result: The LCD displays the last number you dialed. 2. Press the key to dial out the number. Your phone allows you to retrieve the last 10 numbers you have dialed and recall them quickly. Search for and dial a number in Redial Book 1. Press the Redial soft key in standby mode. 2.
4. To return to standby mode, press the key. Note: At step 3, when you select Delete or Delete All options, a message "Confirm ?" will further ask you to confirm the deletion. To confirm press the Del or Del All soft key, to escape press the Cancel soft key. CID Book When you receive a call, if the caller's information is transmitted from the network on which the call was made (and the caller doesn't hide it), the caller's phone number is displayed.
press the More soft key to enter Add to PB menu. 4. Press the Select soft key, you are prompted to enter the name. 5. Enter the name and press the Next soft key, then you can modify the number you want to store. 6. Press the Next soft key, you are able to select the ring tone from Melody 1 to Melody 10, press the Save soft key to confirm and exit, you will hear a confirm beep. Delete a number in the CID Book 1. Press the Menu soft key. 2. Use the Select soft key to choose the CID Book. 3.
Key Lock If you turn on this feature, all keys will be locked except M1, M2 and SOS. You can answer calls by using the key. But when you hang up, the phone returns to the locked mode. This feature is useful to avoid pressing keys by mistake. To lock the keys, in the standby mode just keep the Locked" and the icon. To unlock the keys, keep the the display.
exit. The handset name will be displayed above your handset number in standby mode. Auto Answer With this feature, you can answer a call by just picking up the handset from the base without pressing any key. 1. Press the Menu soft key. 2. Press or key repeatedly to choose HS Settings, press the Select key. 3. Use or key to choose Auto Answer, then press the Select soft key. or key to choose On/Off to enable/ disable the function, then press the 4. Use the Save soft key, you will hear a confirm beep.
You can select to change the dial mode by the following steps: 1. Press the Menu soft key. 2. Press or key repeatedly to choose BS Settings, and press the Select soft key. 3. Press the key to choose Dial Mode, then press the Select soft key. 4. You can press or key to select the required dial mode options (Tone/Pulse) and press the Save soft key. A confirm beep will be heard. Note: If you are not sure which dialing mode should be selected, please contact your local service provider.
Menu Map 1. CID Book 4. HS Settings Alarm Audio Setup Ring Setup Tone Setup Language HS Name Auto Answer LCD Contrast Date & Time Select Base HS Reset 2. Phonebook New Edit Delete Delete All PB Status 3. BS Settings Terminate HS Dial Mode Flash Time Modify PIN BS Reset 5. Registration Phone Book The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number.
1. Press the Menu soft key. key to choose the Phonebook, press the Select soft key. 2. Press the 3. Press the Select soft key to choose New. 4. The display shows "Name ?". Enter the name you want to use, then press the Next soft key to confirm. The display shows "Number ?". Enter the desired number (up to 20 digits), press the Next soft key. 5.*Use or key to select the ring you like to associate with the number, press the Save soft key to confirm. 6. Repeat if necessary.
3. Press the key to choose Edit menu. Press the Select soft key. or key repeatedly until the entry you want to edit displays, press the Select 4. Press soft key to confirm. 5. If necessary, press the Erase soft key to clear the digit(s) then enter the desired name and number, press the Next soft key to save. 6. Use or key to select the ring you like to associate with the number, press the Save soft key to confirm. Deleting the Phone book Entries 1. Press the Menu soft key. 2.
1. In the standby mode, press the key. 2. Press or key repeatedly until the desired number is displayed. Dialing from One-touch Memories In the standby mode, press M1, M2 or SOS to dial out the corresponding number. Editing Memory Numbers Perform the steps of par. Editing the Phone book Entries. Note: The memory default names are M1, M2 and SOS, you can add a name after them but cannot delete the default name. e.g. you can modify M1 to M1: home. Deleting Memory Numbers Perform the steps of par.
2. Press or key to choose BS Settings, then press the Select soft key. or key to choose Flash Time menu. Press the Select soft key. 3. Use 4. The display shows the current setting. Use the or key to select Flash-1 /Flash-2, press the Save soft key. Modify PIN This function allows you to change the PIN number of the currently active Base. The default PIN is 0000. 1. Press the Menu soft key. or key to choose BS Settings, then press the Select soft key. 2. Press 3.
1. Press the Menu soft key. 2. Press or key to choose HS Settings, then press the Select soft key. 3. Press the Select soft key to choose Alarm menu. 4. The display shows the current set. Use the or soft key. key to select On/Off, press the Select 5. If you select On, the display indicates you to enter the time in HH:MM format. Use the numeric keypad to enter. 6.
3. Press or key to choose Tone Setup menu, press the Select soft key. 4. Press the Select soft key again to choose Key Tone. or key to choose On or Off to enable or disable the function. 5. You can use 6. Press the Save soft key. Note: For normal use, we recommend you leave the key tone enabled. This makes the phone easier to use. LCD Contrast Setting The adjustment allows you to optimize the visibility of the display by changing its contrast according to the environment conditions. 1.
5. Enter the current date/time by numeric keypad and press the Save soft key to save and exit. Notes: If you select 12-Hour, AM/PM will appear on the right of the time in standby mode. At step 5 you need to enter the time in 24-Hour format. Selecting a Base This function allows you to select a base from those already registered to the handset. You can access the options by scrolling the menu. 1. Press the Menu soft key. 2. Press or key to choose HS Settings, then press the Select soft key. 3.
3. Press or key to choose the Amplified menu, press the Select soft key. or key to choose On or Off to enable or disable the function. 4. You can use 5. Press the Save soft key. Registration The supplied handset is already registered with the number 1. You can register up to 5 handsets to your base unit in order to share the same line with other people. Before registering a handset to the base, you should press and hold the the base for about 5 seconds then release it. key on the bottom of 1.
Note: During the internal call, if an external call comes in, the LCD will show the caller's number. You should press the key to end the internal call first then press the key to answer the call. Call transfer between handsets You can transfer an external call between the handsets those are registered to the same base. 1. During an external call, press the transfer the call to. key then enter the number of the handset you want to 2.
Caller 1 4361234 Caller 1 4 Caller 2 2915678 1.When you are on the line, the telephone will automatically display the name and number of the second caller. 2.Press the Flash soft key to answer the second caller. 3.When you have finished, press the Flash soft key to continue with your conversation with the first caller. Note: If you have transferred an external call to another handset, you cannot use the call waiting function via the second handset. Feature List 1.8GHz DECT technology with GAP 2.
Troubleshooting Symptom No operation No dial tone Check & Remedy Check that the power adapter is properly connected. Check that the telephone line cord is properly connected. Check that the handset batteries in full power. Check that the handset batteries are installed properly. Check that the telephone line cord is properly connected. Check that the power adapter is properly connected. Nothing appears Check that the handset batteries are installed properly.
Frequency Range 1.88~1.90GHz Channels 120 Duplex channels Carrier Power <250mW Modulation GFSK Frequency Stability < ± 50 KHz Charging time 15 hours Ambient temperature Humidity Normal: 15℃ ℃ ~ 35℃ ℃, Extreme: 0℃ ℃ ~ 40℃ ℃ 0%~90% Dimensions (mm) Base: 140 x 130 x 62; Handset: 185 x 55 x 32 Power Supply Base input: 7.5V, 500mA; Handset input: Ni-MH: 1.2V x 3, 600mAh Design and specifications are subject to change without notice.