Operation Manual

exit. The handset name will be displayed above your handset number in standby mode.
Auto Answer
With this feature, you can answer a call by just picking up the handset from the base without
pressing any key.
1. Press the Menu soft key.
2. Press or key repeatedly to choose HS Settings, press the Select key.
3. Use or key to choose Auto Answer, then press the Select soft key.
4. Use the or key to choose On/Off to enable/ disable the function, then press the
Save soft key, you will hear a confirm beep.
Range Alarm
A beep will sound when the handset is out of range of the Base. You are able to select to
enable/disable this audible warning.
1. Press the Menu soft key.
2. Press or key repeatedly to choose HS Settings, press the Select soft key.
3. Use or key to choose Tone Setup, then press the Select soft key.
4. Press the key to choose Range Alarm, then press the Select soft key.
5. Use or key to choose On/Off to enable/disable this audible warning, then press the
Save soft key, you will hear a confirm beep.
Paging
You can page the handset from the base unit making it ring with a special tone. It's useful to
locate a lost handset.
Press the key on the bottom of the base (less than 5 seconds), all the handsets registered to
the base will ring for about 60 seconds.
To stop paging, press the key on the base again or any key on the handset.
Note:
On a long key press, more than or equal to 5 seconds, the base will enter subscription mode.
For details, see par. Registration.
Dial Mode