Operation Manual

1. Press the Menu soft key.
2. Press the key to choose the Phonebook, press the Select soft key.
3. Press the Select soft key to choose New.
4. The display shows "Name ?". Enter the name you want to use, then press the Next soft key to
confirm. The display shows "Number ?". Enter the desired number (up to 20 digits), press the
Next soft key.
5.*Use or key to select the ring you like to associate with the number, press the Save
soft key to confirm.
6. Repeat if necessary.
* If you want to set a VIP number, you should select a special ring tone for it. The ring tone
should be different from the external ring you have set. You can set up to 9 VIP ring tones
associate with 9 VIP numbers/groups.
Note:
If you make a mistake while entering a number, use the Erase soft key to correct it. Each time
you press the key, the last digit is deleted. To clear all digits, press and hold the Erase key.
Using a Pause
A pause is useful when you access an interactive voice response system, such as an automated
banking system. A pause provides a delay of 3 seconds. If you want to insert a pause when you
dial a number in standby mode or store a number in memory, press the key. The letter P
will appear at the pause entry.
Viewing the Phone book Entries
1. In the standby mode, press the key.
2. Press or key repeatedly until the desired name is displayed.
Dialing a Number from Phone book
Find out the number you want to dial. Refer to "Viewing the Phone book Entries". Then press
the key or Dial soft key.
Editing the Phone book Entries
1. Press the Menu soft key.
2. Press the
key to choose the Phonebook, press the Select soft key.