Operation Manual

Turning Handset On/Off
If the handset is in power off mode, when you place the handset on the base, it automatically
turns on. To turn the handset on or off in standby mode, follow these steps:
1. To turn on the handset when it's off, press and hold the key until you switch the display
on. On power up, the handset will enter subscription mode and search for a registered base. A
message as shown below will be displayed to the user, and the signal icon will flash.
2. To turn off the handset, keep the key pressed until the display disappears.
If the handset is successful in finding a base, the handset will enter the standby mode, the
display will show handset number and the handset name (if you have one saved as described on
par. HS Name), signal icon, battery icon and current time. If the handset is unsuccessful in
finding a base, the handset will behave according to the Out of Range condition.
Note:
When battery power is very low, if you place the handset on the base, the display will show as
below. YOU SHOULD FULLY CHARGE THE HANDSET BEFORE USING.
Making a Call
1. Pick up the handset and press the key.
Result: The icon appears on the LCD.
2. Dial a telephone number.
Note:
You can store up to 10 telephone numbers in memory for automatic dialing.
3. To end the call, either press the key or replace the handset on the base.
Basic Functions