Contents I. Safety and precautions…………………………………………………………………………………..2 II. Cell phone outline………………………………………………………………………………………4 III. Preparations……………………………………………………………………………………………5 IV. Description of cell phone…………………………………………………….……………………….10 V. Basic operation of cell phone………………………………………………………………………….14 VI. Operation menu function.......................................................................................................................18 VII.
I. Safety and Precautions To use your cell phone safely and effectively, please read the following information before use: ◈ Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. ◈ Please keep your phone out of the reach of children. ◈ To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a call after parking your car by the roadside. Do NOT use the phone during driving at high speed.
◈ ◈ ◈ ◈ ◈ Please use your phone in the environment which is neither too hot nor too cold, and do not expose your phone to the strong sunlight or use in high-humidity environment. Do NOT use liquid or wet cloth with strong detergent to clean your phone. Your cell phone has photo and record functions, so please use these functions following the related laws and regulations. You may violate the law and regulation if taking photo and record without authorization.
II.
III. Preparations Installation of your SIM card You can apply for two different numbers offered by two network providers and get two SIM cards. With those two SIM cards, you can use various functions of this cell phone. Many parameters required for communications are stored in the SIM cards. Personal data, including the PIN (personal identification number), phonebook, SMS and other extra system services can also be stored in the SIM cards.
Note:The SIM card is a small object, please keep the card out of the reach of the child to avoid swallowing the card by accident! Do not touch the metal surface of the SIM card and keep it away from electromagnetism to avoid loss and damage on the data. You will not be able to connect to the network if the SIM card is damaged. Installation of memory card The phone supports T-FLASH card as to expand the memory space.
Installation of battery Please use the original-packaging battery and accessories. Store the battery well if it is not used. Please install the battery at shut down status. Note:Please follow the correct procedures as shown in the figure to prevent damage to the battery contact points. Charge the battery The new battery must be fully charged and discharged for several times to reach its best performance. Charge as soon as possible when the power is used up as over-discharge will damage your battery.
When charging, if the phone is switched on, the power quantity icon at the top right corner of the screen will twinkle and will stop twinkling when the battery is fully charged, if the phone is switch off, an icon will appear at the screen to show the battery is in charging. Note: A little heating while charging is normal.
If the call time becomes too short, you may need to buy a new battery produced by Company or authorized by our company. Unqualified battery or accessories may damage your phone and even cause danger! ◈ If the battery is left unused for a long time or the power is too low, it may require longer time for the charging interface to appear, please wait patiently. Note:1、For your safety and environment, please do not throw away the battery everywhere.
IV、Description of Cell Phone Dialing key Make or answer calls. Short pressing the dialing key to enter call log under standby status. Hang-up key & on/off key Hang-up or reject a call. Long press the key to switch off the phone under standby status. Long press the key to switch on the phone when the phone is switched off. Direction keys Move the bar or cursor. Enter appointed shortcut under standby status. OK Key Confirm an operation in menus. Number keys Input numbers or characters.
Icons on screen in standby status SIM card 1 Antenna SIM card 2 Antenna Alarm clock activated SIM card 1 SMS SIM card 2 SMS Battery Ringing Vibration then ring Vibration and ring Vibration Missed calls in SIM card 1 Missed calls in SIM card 2 Keypad locked Languages & Input Methods English input method is provided in your phone. For details, please refer to chapters related to English editing, where you can learn different input methods and how to switch between them.
Ringing Only Vibrating Only Vibrating and ringing Ringing after vibrating Descriptions of nouns ◈ ◈ ◈ 12 Making a national call The simplest way to make a domestic call is to input a phone number by numeral keys and press the dialing key. If call by SIM card 1, the screen will display “SIM Card 1 Dialing”, and if called by SIM card 2, the screen will display “SIM Card 2 Dialing”. Call status will display on the screen when the call is answered. Press the hang-up key to end the call.
◈ ◈ extension number and you can call the extension. You can input a “P” by long pressing or repeatedly short pressing the * key. Call extension of a fixed phone: phone number + P + extension number + dialing key. Make emergency calls In any country where digital GSM is used, you can make an emergency call if your phone is covered by the network (you can know about this by checking the signal strength indicator bar at the upper corner of the display of the cell phone).
V、Basic operation of cell phone Switch on Press and hold on “ON/OFF” to start up the cell phone. If no password settings are given for the SIM card and cell phone, the phone will search for a network automatically, and when the cell phone registers a network, the name of the network supplier will be shown on the screen. You can now answer or make a call.
battery, and if you do like this, it is easy to damage SIM card and may cause loss of some information. Making a call ◈ Enter the phone number in standby status, and press the calling key to call. If you want to hang up or cancel the call, please press the hook up/cancel key. When the phone is connected, you can see the holding time on the screen. ◈ Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the calling key to call.
If the call is to SIM card 2, “Call to SIM Card 2” will display in front of the number or name. Speed dial The phone provides 8 speed buttons, and you can define the phone numbers corresponding to these buttons. So, as long as you long press [2 to 9] keys in standby status, you can call speedily; [1] key is specially used for the speed dial of voice mailbox number.
◈ Mute/resume: You can switch on/off microphone. ◈ Dual-tone multi-frequency, DTMF: You can set up whether to send out a DTMF signal. Note: Some menu entries just appear under the specific condition, or they need support from the local network, such as: “Hold” and “New conversation”, etc., for detail, please consult the network supplier. Non-response event When the cell phone has new unread messages and missed call, etc.
VI、Operation menu function 1 Messages 1.1 Text message The SMS function is a network service. You may need to apply to the network operator first before you can send and receive a short message. Your cell phone supports the short message sending function. Short messages are sent to network SMS center first and then sent to subscribers. If the subscriber does not turn on the phone or cannot receive messages (storage is full), the network will keep this message temporarily.
more messages and sent. The following menu option functions by using left key are provided when you are writing a short message: ◈ Select SIM card 1/2:Enter sending method option and send the message. ◈ Insert templates:To use a built-in template. ◈ Insert contact number: To insert a selected number of recipient in the phone book. ◈ Insert contact name: To insert a selected name of recipient in the phone book. ◈ Input method: To select your input method.
◈ Delete Many Select:Delete some or all messages. ◈ Forward: To forward the current message to the other subscriber. ◈ Copy to phone/SIM:To copy the current short message. When the message is stored in phone/SIM, it can be copied to the SIM/phone storage. ◈ Move to phone: To move the current short message. When the message is stored in phone/SIM, it can be moved to the SIM/phone storage. ◈ Delete all: Delete all the inbox messages. ◈ Cope all: Copy all the messages from SIM/phone to phone/SIM.
type. To send a message, the SMS center number shall be provided. Note:The number of the SMS center is provided by the network operator. For details, please contact the network operator. 【Common settings】:Enable or disable delivery report and reply directory. ◈ Delivery report:The network reports whether the opposite side has received the message and the time received. ◈ Reply path:To transfer the reply path to the network terminal. This function requires the support of message center.
you have set the voice mailbox number. 1.4 Broadcast message Cell broadcast is a service provided by the network operator to send messages such as weather forecast, traffic status, etc. to all GSM subscribers in a specific area. Broadcast message of SIM card 1: Note:The realization of the cell broadcast function needs the support of the network. For details, please contact the network operator. 【Receive mode】 :Enable/disable the Broadcast Message.
book. 2.3 Add New Contact You can add a new entry to the phone or SIM card . Description: If picture link, ring link, and incoming call group are set in a record simultaneously, the incoming call group function will be invalid. 2.4 Copy all You can copy all selected phone entries in SIM card 1/2, hone and memory card to each other. 2.5 Delete You can delete all entries of the SIM cards or phone, or delete entries one by one. 2.6 Caller groups You can set melody, caller picture, group members to five groups.
3 Call Center 3.1Call history 【SIM 1/2 missed calls】 :To view the list missed calls (requiring network service support). 【SIM 1/2 dialled calls】 :To view the most recently dialed numbers. 【SIM 1/2 received calls】 :To view the most recently phone numbers of answered incoming calls(if available from the network). 【Delete SIM 1/2 card logs】 :To deletes recent call logs. 【SIM 1/2 call timers】 : Last call: Shows the duration of the last call. Dialled calls:Shows the duration of all dialed calls.
3.2 Call settings 3.2.1 SIM 1/2 call settings: 【SIM2 Dial setting】: Enable or disable the left soft-key of SIM2 dialing. 【Caller ID】 :Includes Set by Network, Hide ID, and Send ID. 1 Set by network:The number of the phone will be sent as per the default mode when a call is initiated. 2 Hide ID:The number of the phone will not be sent when a call is initiated. If the system doesn't support this function, it may not make a call. 3 Send ID:The number of the phone will be sent when a call is initiated.
operation is busy. Divert all data calls Network will divert call incoming calls (requiring support of network). Cancel all divert Cancel all the divert functions. 【Call barring】 1 Outgoing calls All calls:To restrict all outgoing calls. International calls:To restrict international outgoing calls. International calls except to home PLMN:While you are abroad, you can only call the numbers of the country (where you are) and your home country (at which your service supplier is located).
connect a phone number. 3.2.2.2 Speed dial:To switch on the speed dial function, and edit the corresponding speed dial number. If the speed dial is "On", then you can long press the corresponding key (2-9) to dial the number designated to the key through the standby interface. 3.2.2.3 Background sound:You can set background sound during a call. 3.2.2.4 Call time display: Display the lapsed time during a call. 3.2.2.
4 Settings 4.1 User Profiles: Your phone provides different profiles for you to customize ring tone and other settings under different environments. You can customize a profile according to your needs and enable the profile. The available profits include General, Meeting, Outdoor, Indoor, Earphone, Bluetooth and Power saver.
◈ Disable:To close the selected shortcut menus. ◈ Change order: To change the order of shortcut menus. 4.3 Dual SIM settings Dual SIM open:Enable SIM card 1 and 2 standby. SIM card 1 enable:Enable SIM card 1 standby status. SIM card 2 enable:Enable SIM card 2 standby status. Flight mode:Enable flight mode. 4.4 Phone settings 4.4.1 Time and date: With this menu, you can set city, time/date, and time/date format. ◈ Set time zone: To set the home city.
4.4.3 Language: To select the used language for the phone. 4.4.4 Pref. input method: To set the default input method according to your operation habit. 4.4.5 Display characteristics: ◈ Wallpaper:Set the background picture in standby screen interface. ◈ Screen saver: Enable or disable the screen saver function. ◈ Power on display: Can select the system or other picture as your power on animation. ◈ Power off display: Can select the system or other picture as your power off animation.
4.5 Network settings: SIM card 1/2 network setup Name Description Search: To search the network again. Select network: To select a network. The phone only load the appointing network. Network selection When the network can’t work, the phone won’t register other network. Search mode: Auto/Manual. Preferences To select the preferred network. 4.6 Security settings: 4.6.1 SIM card 1/2 security settings 4.6.1.1 SIM card 1 lock:To unlock or lock SIM (PIN required ). 4.6.1.
4.6.3 Auto Keypad lock: To unlock or lock the keypad. The time for locking keypad can be set. 4.6.4 Change Password: The default password “1122” of phone, message, phonebook, calling records and privacy protection can be changed as the desired password of 4 to 8 digits. 4.6.5 Privacy Protection: Includes protection for phone book, message and call history. If this function is enabled, corresponding menu or content will be locked. To access, enter the password. The default password is “1122”. 4.
5.2 Audio Player Descriptions of Audio Player options: ◈ Play: To play the selected MP3. ◈ Details: To view the detailed information of the selected MP3. ◈ Add to ringtones: To add the selected song to the tone library for selection. ◈ Refresh list: To update the play list of songs. ◈ Settings: To set parameters for playing MP3. 5.3 Games Provide you some games. Please refer to help of the game for specific operation. Game settings: Sound effect: To enable/disable the sound effect.
◈ Use as: To add it to user profiles. Settings: You can set storage, file format and audio quality. 5.5 FM Radio ◈ Channel list:List out all the current channels. You can enter channel list, edit it and display the searched channel list. Display the recorded broadcasting list. ◈ Manual input:Input the desired broadcasting channel manually ◈ Auto search:Automatically search FM and setup. ◈ Setting:Set backlight play and cell phone speaker recording format storage device.
6.2 Flashlight: Enable or disable it. 6.3 Calendar With this function, you can view the calendar and schedule, and you can schedule with the scheduler to set the schedule and alert. Move the cursor to the desired date with direction keys. If a memo has been set in the schedule of some date, the date is highlighted. To view all memos of a day, move the cursor to the date. In this case, the following operation can be performed. 6.3.1 View: To view and set the schedule of a day. 6.3.
◈ ◈ ◈ ◈ ◈ ◈ ◈ Global settings: To set the attributes of an E-book. Book info: To view the attributes of a text. Delete: To delete a text. Delete all files: To delete all texts. Sort by: To sort E-books in a folder. Apply global settings: To apply the settings. Help: To open E-book help description. 6.6 Calculator ◈ Eight operators, i.e. “+”, “-”, “×”, “÷”, “m+”, “m-”, “mc”, and "mr”, are provided. ◈ Choose the Clear or press the right soft key to clear items entered.
VII. Operating instructions of English editor Your phone provides you with different input methods for the convenience of using other function. You can enter texts by keypad at anywhere requiring entering texts. Enter function setting > Phone setting > Default input method to choose a default input method. Input interface key function Press corresponding key under input interface, for example of writing message. Numeral 1 to 9 is used to edit text contents. Direction keys:Control the movement of cursor.
Punctuation Input Enter the “*” key to switch to the punctuation input. Press the up, down, left or right key to select the desired one, and press the left selection key to choose and press the corresponding number key to enter.
VIII. Appendix 1 Troubleshooting Failure The phone fails to power on. SIM card error Possible cause 1、 Check that the battery is charged; 2、 Check that the battery is installed correctly. 1、 Check whether the SIM card is dirty. If the card is dirty, clean it; 2、 reinstall the SIM card; 3、 If the SIM card is damaged, replace the SIM card. Weak signal Check that the signal intensity indicator on the screen. 4 bars indicate a strong signal, and 2 bars or less indicate a weak signal.
Battery charge fails Cannot connect to the network Photos shot too dark Photos shot too blurred Photos shot is distorted Cannot access the service menu 40 1、The battery may have been excessively discharged. To charge the battery, it is necessary to connect it to a charger for a certain period of time; 2、The battery may be deteriorated.
IX.