CONTENTS I. SAFETY AND PRECAUTIONS ................................ERRORE. IL SEGNALIBRO NON È DEFINITO. II. CELL PHONE OUTLINE .........................................ERRORE. IL SEGNALIBRO NON È DEFINITO. III. PREPARATIONS ...................................................ERRORE. IL SEGNALIBRO NON È DEFINITO. IV. DESCRIPTION OF CELL PHONE ....................... ERRORE. IL SEGNALIBRO NON È DEFINITO.1 V. BASIC OPERATION OF CELL PHONE................ ERRORE. IL SEGNALIBRO NON È DEFINITO.6 VI.
I. Safety and Precautions To use your cell phone safely and effectively, please read the following information before use: Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. Please keep your phone out of the reach of children. To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a call after parking your car by the roadside. Do NOT use the phone during driving at high speed.
Please use your phone in the environment which is neither too hot nor too cold, and do not expose your phone to the strong sunlight or use in high-humidity environment. Do NOT use liquid or wet cloth with strong detergent to clean your phone. Your cell phone has photo and record functions, so please use these functions following the related laws and regulations. You may violate the law and regulation if taking photo and record without authorization.
II.
三、III. Preparations 三、 Installation of your SIM card You can apply for two different numbers offered by two network providers and get two SIM cards (users identify cards). With those two SIM cards, you can use various functions of this cell phone. Many parameters required for communications are stored in the SIM cards. Personal data, including the PIN (personal identification number), phonebook, SMS and other extra system services can also be stored in the SIM cards.
Note:The SIM card is a small object, please keep the card out of the reach of the child to avoid swallowing the card by accident! Installation of memory card The phone supports T-FLASH card as to expand the memory space. Please install or take out the memory card as per the following picture after shutting down the phone.
Installation of battery Please use the original-packaging battery and accessories. Store the battery well if it is not used. Please install the battery at shut down status. Note:Please follow the correct procedures as shown in the figure to prevent damage to the battery contact points.
Charge the battery The new battery must be fully charged and discharged for several times to reach its best performance. Charge as soon as possible when the power is used up as over-discharge will damage your battery. Disconnect the charger and the power supply and then disconnect the mobile phone when the battery is fully charged. Connect your phone to the charger as per the drawing.
twinkle and will stop twinkling and fully display when the battery is fully charged. If the phone is switch off, an icon will appear at the screen to show the battery is in charging. Note:A little heating while charging is normal.
the network. PUK and PUK2 (8 digits) A PUK is required to change the PIN. To change the PIN2, you need to use PUK2 (personal unlock code). If PUK is not provided together with the SIM card, please ask for it from your network provider. 〈Warning〉:If the PIN code is entered continuously three times, the SIM card will be locked in. Please consult the network supplier right away to look for deciphering. Unauthorized deciphering may cause permanent failure to the SIM card.
四、IV、 、Description of Cell Phone The mobile phone provides the following keys: Dial key Press it to originate a call on SIM card 1 or SIM card 2 by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records.
Press it to delete a character before cursor. Linefeed This key helps to switch to another line when the interface is in the edit interface. Space key Press it in the edit interface to get a blank. Sym key Press it in the edit interface to input a symbol. Up arrow key: :Press it to switch between input methods. a : Press it to switch between upper case and lower case. alt: :Press it in the edit interface to switch between symbols and letters, numbers and letters, symbol and symbol on the keypad.
SIM card SMS SIM card SMS Battery Ringing Vibration then ring Vibration and ring Vibration Missed calls in SIM card SIM card 1 GPRS Bluetooth Call divert activated in SIM card Keypad lock Languages & Input Methods English input method is provided in your phone. For details, please refer to chapters related to language editing, where you can learn different input methods and how to switch between them.
The simplest way to make a domestic call is to input a phone number by numeral keys and press the dialing key. If the both SIM cards are inserted and dual SIM open, SIM card 1 dial or SIM card 2 dial would be selected by pressing dialing keys of SIM 1 or SIM 2. Note: Enable the function of LSK dialing function in the mune “Call center / General call settings/ SIM card 2 call settings”. Then you could dial from SIM 1 by pressing the calling key,and dial from SIM 2 by pressing LSK.
In any country where digital GSM is used, you can make an emergency call if your phone is covered by the network (you can know about this by checking the signal strength indicator bar at the upper corner of the display of the cell phone). If your network operator does not provide roaming service in that area, the screen will display "EMERGENCY CALLS ONLY", telling you that you can make this kind of call only.
V、 、Basic operation of cell phone Powering On/Off the Mobile Phone Hold the On key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 1234. Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface.
Redial the latest phone number:Press the calling key in standby status to search the latest list of phone number or name. Roll over to the number or name, then press the calling key. Adjusting the receiver volume During a call, you can press side keys to adjust the receiver volume. Answering a call When there is a coming call, it will indicate in a mode of ring, vibration, vibration and ring,ring after vibration or lighting according to the setup of cell phone. To answer a call, press the calling key.
click an entry during conversation: Hold: Temporarily suspend the current conversation, but the conversation channel still under connection. End: End the current connection. New conversation: Enter the dial interface, and make another call. Phonebook: You can enter a phonebook directory. Information: You can enter messages directory. Record:You can record the current calling contents. Background tone:Enable or disable the background tone. Mute/resume: You can switch on/off microphone.
六、VI、 、Operation menu function Messages If the short message memory is full, a blinking SMS icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. If the destination user has received the short message you sent and the short message delivery report function is activated, the phone will give off a message report alert tone. Write message Input the content of the short message to be sent.
Delete messages You can delete all message stored in inbox, drafts, outbox, sent messages or all of them. SMS Settings This function enables you to set the default features about the SMS. Profile settings: Save or modify the short message service center number required for short message transmission, or obtain it from the network operator. Voicemail server: Edit: Edit or delete your voice mailbox number; or select OK to save the number.
the Left soft key and select Search. All the contacts meeting the search condition are listed. After selecting a telephone number in the phonebook, select Options to perform the following operations: View: View the content of the telephone number. Sent text message: sent message to this number. Sent multimedia message: sent MMS to this number. Call: Call the number you’ve selected. Edit: Edit the telephone number. Delete: Delete the telephone number from the phonebook.
Call history SIM1 Missed Calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select Read to enter the missed calls list. Navigate to a missed call and then press the Dial key to dial the number that originated that call. SIM1 Dialed Calls You can view the latest dialed calls. Choose SIM1 dialed calls and then select a dialed call to delete, save, dial, or edit (or send a short message to it).
SIM1 text msg. Counter Choose SIM1 text msg. counter to set the number of short messages sent and the number of short messages received. Note: This function does not relate to the SIM card. The number of short messages sent and the number of short messages received do not change even after the SIM card is replaced. Note: The call history settings of SIM card 2 are the same as SIM card 1. SIM1 GPRS counter Access this menu to view GPRS rate you’ve sent or received or to reset counter.
Input Address: input the website to be searched and press finish button to access to the network directly Service Inbox: save the short messages sent from the website Settings: set up WAP-related service Note: Consulting the local network operator for related fee and specific setup. STK service is the tool kit of SIM card. This phone supports the service function .The specific items are depended by SIM card and network.
*Templates: Some templates are available for you to write Email. Multimedia Image viewer You can select image/photo folders in Memory card/phone. The image viewer enables you view, send, rename or delete your pictures. And you can set the image you like as wallpaper, Screen saver, power on/off display or caller picture Video player This function enables you play, send, rename, delete, delete all files, rank, save about your video and movies. Photo editor Access this function to edit photos.
speed and select different instrument to play the melody. Slide show Select image file and play it. Camera This function enables you take a picture you want. Roll the phone to align the camera to the picture and then press OK key, which the picture will be stored in the album. . Select “option” and you can set some paramount of camera or scan the pictures you’ve taken in gallery and view the storage status. Video recorder This function enables you to record dynamic pictures.
File manager The phone provides a certain space for users to manage files and supports the T-Flash card. You can use the file manager to conveniently manage various directories and files on the phone and the T-Flash card. Open Choose File manager to enter the root directory of the memory. The root directory will list the default folders, new folders and user files.
Settings Dual SIM Card Settings Dual SIM open: Both SIM cards are standby if you set this option. Only SIM1 open: Only SIM card 1 can be identified if you set this option. Only SIM2 open: Only SIM card 2 can be identified if you set this option. Flight mode: You can set the phone to Flight mode. Phone Settings Time and date: set the date format, the time format, and detail time of the location. Language: Select the display language for the mobile phone.
Note: This function relates to the network. If you select Hide ID, dialing may fail. Therefore, make sure that calls can be normally dialed before you choose Hide ID. ◆ Call waiting: : After you choose Activate, the mobile phone will contact the network. A moment later, the network will make a response and send a message to acknowledge your operation.
of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other numbers. To end the auto redial process, press the End key. Note: This function requires support from the network operator to which the SIM card is registered. Background sound: :Set background sound status and effect as needed. Call time display: To display call time or not in a call. Call time reminder: To set single or circle tone in a call to make you know the time.
contact the network operator. Fixed dial: This function requires the SIM card's support and the network operator's support. When the fixed dial function is activated, you can dial only the numbers in the fixed dial list. To activate the fixed dial function, you need to input the PIN2. Barred dial: Activate or deactivate the barring of some or all calls. This function requires the SIM card's support. Change password: To change the password. Phone lock: The function enables you to lock/unlock the phone.
Display The main menu customize function enables you to choose the functions you need to display on the main menu. And you can select images and set them as wallpaper, screen saver, power on/off display. You can show date and time on the screen or shut down this function and you can set duration of LCD light time.
Currency converter To store exchange rate, press “OK”, then choose exchange rate setup. Input one rate and press OK. Entering the money amount and press OK, and then choosing exchange to foreign currency. World clock To view city of each time zone, corresponding date and time will display at the bottom of the screen. Press optical mouse to choose to view cities. Press Left soft key to switch on or off daylight saving time of other cities. Notes You can record some information in this menu.
Activate Select Activate to activate the selected mode. Customize After choosing one of the above five modes, select Customize to edit the following items: Tone setup: Set the incoming call tone, power-on prompt tone, power-off prompt tone, message tone, and keypad tone. Volume: Set the volume of the conversation tone, the ring tone, the keypad tone. Alert type: Select ring, vibrate, ring and vibrate, or ring after vibrate mode. Ring type: Set the ring type to Single, Repeat or Ascending.
Facebook Log on Facebook through a web. Twitter Log on Twitter through a web. Google Log on Google through a web. Lock keypad Select this function to lock keypad. To unlock keypad, you need to short press power control button. Power off Select this function to power off the phone. To power on the phone, you need to press power control button for 2 to 3 seconds. VII. Operating instructions of editor Your phone provides you with different input methods for the convenience of using other function.
Transfer direction keys to move the cursor to desired symbol, press OK key to select it. VIII. Application of USB storage function Precautions before using Please maintain correct operation of USB equipment connection and disconnection. Please don't use windows formatting command to carry on the format operation to the mobile disk of cell phone; otherwise, it will result in the damage that can't be repaired any more. USB operation environment: ◈ Windows2000 / XP.
IX. Appendix 1 Troubleshooting Failure The phone fail to power on SIM card error Possible cause 1、 Check that the battery is charged; 2、 Check that the battery is installed correctly. 1、 Check whether the SIM card is dirty. If the card is dirty, clean it; 2、 Reinstall the SIM card; 3、 If the SIM card is damaged, replace the SIM card.
Weak signal Check that the signal intensity indicator on the screen. 4 bars indicate a strong signal, and 2 bars or less indicate a weak signal. Call initiation fails 1、 You may set the Hide Caller ID but the network operator does not support this service; 2、 A strong signal interference may exist; 3、 You may activate the Call Barring function; 4、 You may activate Line 2 but the network operator does not support this service. Battery charge fails 1、The battery may have been excessively discharged.
Photos shot too dark 1、The brightness is set too low; 2、The ambient light is too dark. Photos shot too blurred 1、The object shot is moving; 2、Your hand shakes when the shutter is pressed. Photos shot is distorted The object shot is too near to the lens. Cannot access the service menu The standby picture can’t be displayed integrally. X. Appendix II Abbreviations The SIM card may not support the service. Maybe the picture is extra of the size.
PUK PIN Unblocking Key IMEI International Mobile Equipment Identity CB 40 Cell Broadcast GPRS General Packet Radio Service MMS Multimedia Message service