User's Manual

23
English
NOTE: When connecting a device via the Side AV input, you must use a connection cable to enable connection. See
the illustrations above. To enable PC audio, you will need to use the SIDE AV CONNECTION cable’s WHITE & RED inputs.
If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.When receiving DTV
channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. When using
the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on
the wall.Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction
manual for details of the settings.
Always connect a USB medium directly to the USB port on the TV. The use of a USB extension cord is not supported by the TV. The
TV’s USB port cannot communicate with a PC.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio
YPbPr or PCConnection Cable
HDMI
Connection
(back)
SPDIFF
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
HEADPHONE
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(side)
YPbPr Connection
Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Getting Started
Connections