Contents 1. Safety Notes............................................................................................................ 4 2. Phone Appearance .................................................................................................. 6 3. Preparation before Use ............................................................................................ 8 3.1 Install your SIM card .............................................................................................. 8 3.
4.10 Service ................................................................................................................ 13 4.11 Groups ................................................................................................................ 13 4.12 Definition of terms ................................................................................................ 13 5. Basic Operation of Phone ...................................................................................... 14 5.
6.2.2 [Message] ............................................................................................................ 19 6.2.3 Call Center .......................................................................................................... 26 6.2.4 Organizer............................................................................................................. 30 6.3 Entertament ......................................................................................................... 31 6.
1. Safety Notes In order to use your mobile phone safely and effectively, please read the following information before your using. Please switch off the phone when you are near chemical plant, gas station, oil storeroom or other exploders. Keep your phone away from children. Please use your earphone to communication during driving so as to ensure safety; except for emergency, please dial or receive a call after you park your car at roadside; especially do not use the phone during high speed driving.
You can enter emergency call numbers such 112 and press Call Key to dial it out after you make sure your phone is powered on and in service state, then report your location and explain the situation briefly. Don’t hang up the call until you are permitted.
2. Phone Appearance There are 21 keys on keypad and 2 side keys on your phone. It is single-screen display. There are built-in vibration motor, one earphone, a transmission port used for charger/data line and a port for outer connection with memory card (T-FLASH card). The picture may be a little different from actual phone.
(Front elevation of the phone is as follows:) (Back elevation of the phone is as follows:) 7
3. Preparation before Use 3.1 Install your SIM card When you register your phone number, you can apply for two different numbers and two different network providers. Then you will get two SIM cards (Subscriber Identity Module cards) provided by network providers. With the two SIM cards, you can use all functions of the phone.
automatically. The prompt “remove memory card” will appear on the screen. Fasten the buckle and removing is finished. Note: T-FLASH card is a tiny object so please keep it out of children’s touch for fear that they may put it into mouth by mistake! 3.3 Install battery Original battery and fittings are appropriate for your phone. When the battery is not in use, please put it into protective box. Please install the battery according to the following diagrammatic presentation.
When you charge the battery in switch-on state, icon of battery capacity on your phone screen will be displayed from right to left in animation way. When the battery is fully charged, battery capacity will be displayed in full-grid and still way. It is normal if the battery is slightly euthermic during charging. 3.
code. Please unlock it with PUK2 code if you enter wrong PIN2 code for three times continuously. Please contact network operators for unlocking immediately. Unauthorized trial of unlocking may render permanent failure of the SIM card. 4. Brief Introduction of Phone 4.1 Call key of card 1 It is used to dial calls (when the number is entered or in phone book) or answer incoming call(s).
Among them “P” and “W” are convenient for calling extensions and “+” is used for making international long-distance call. Tip: Difference between “P” and “W” is that “P” is to send DTMF directly after three seconds’ pause while for “W” a window will pop up for asking the user whether send it to DTMF or not. 4.7 Display icons in standby state on screen Antenna. The antenna icon shall be changed. Alarm clock is started Prompt of SMS on card 1. The icon of card 1 shall be changed. Prompt of SMS on card 2.
Ringing. Change the ringing icon as red one. Vibration Ringing after vibration Vibration and ringing 4.10 Service Service means the toolkit of SIM card. Your phone supports service function and the detailed menu items depend on the SIM card and network. The service menu will be added to phone service automatically if both the network provides service business and your SIM card supports the service function. 4.
Method for dialing an extension of installed phone is (not containing plus): Phone Number + “P” + Extension Number + Dial Key Emergency Call In any country using digital GSM network, as long as you are in the network covering range (which can be learned from the indication bar of network signal strength on the left-upper corner of the phone screen), you can call an emergency service.
If current switch-on mode is set to be “double cards are started” or “only card 2 is started”, when the phone has checked automatically that SIM2 is usable, the following prompts will appear on the display screen in sequence: 6> “Input PIN of card 2” – if you have started the SIM lock of card 2. 7> “No service” – indicates failed registration of network for card 2 and you can’t call at the moment.
If card 2 is called, “SIM2” will be marked before incoming call number or name. 5.7 Speed dial Your phone provides 9 shortcut keys. You can customize phone numbers corresponding to these keys (for detailed description, please refer to “phone book”). Thus, as long as you long press corresponding number keys or activate screen dial to click [2-9] keys in standby state, you can dial call quickly.
Rename Delete play interface or press ‘*’ key to perform full screen play. Send appointed videos to phone book, screen protection, switch-on animation, switch-off animation, MMS and Bluetooth. Change the name of the specified video files. Delete the specified video files in 3GP formats. Delete all Delete all files in Video folder in file management directory. Save path The files can be saved in phone or SIM card. For search convenience, Order the files according to name, type, time and size.
Photos Camera settings Image settings View the saved photos. The following settings can be performed: fill light, shutter sound, exposure compensation, flicker frequency, delay shoot and continuous capture. Photo size： 176*220、80*60、160*120、320*240、640*480 Scene mode Photo quality: middle, high and low Modes such as automatic, sunlight, osram lamp, fluorescent lamp, cloudy and incandescence can be selected. Automatic and night shoot modes can be set.
Note: If one piece of record has been set the functions of video link, ringing link and incoming group at the same time, the function of incoming group will be invalid. Copy all: Copy all numbers from card 1 to the phone, from the phone to card 1, from card 2 to the phone and from the phone to card 2. Delete: Delete all: Delete the records in phone book from SIM card 1, SIM card 2, the phone or delete the records item by item.
One blinking icon of message will be displayed on the top line of the screen if the message memory is full. This phone has two cards, and the messages of card 1 and card 2 are saved respectively, also, the prompt of message full of card 1 and card 2 will be displayed respectively. The card can receive new message only if some messages are deleted. If the other party has received the message, you can hear the prompt tone of message report (if the function of message receive prompt is On.
Inbox Reply: reply the received message with text message. The text message will be sent out from card 1 if it is to reply the received message on card 1. In the same rule, the text message will be sent out from card 2 if it is to reply the received message on card 2. Delete: delete current SMS. Forward: you can forward this message to others directly. Copy to phone: You can copy the SMS to phone. Move to photo: move the SMS to phone.
Message report: network will inform whether the other party receives the message and the received time. Reply path: forward the reply path to network. This function needs the support of SMS center. Memory: here you can view the memory of SMS in SIM card or phone. Storage position: set the position (SIM card or phone) to save messages Note:The aforesaid four settings are applicable to message settings of card 1 and card 2. Preferential link: GPRS preferential, GSM preferential, only GSM used.
Add image: insert image. Add sound: insert sound. Add video: Insert video. Add accessories: Insert accessories Add new page affront: add a new page before this page. Add new page rearward: add a new page after this page. Add bookmark character: Add websites etc. Preview: you can preview the edit effect of MMS. Interval time: you can set the playtime of MMS on current page.
Send: Signature—edit the name of auto signature. Validity period---- set the storage time and sending time of short message service center: 1 hour, 12 hours, 1 day, 1 week and maximum. Delivery Report---- start/ close the prompt of Send Report. Read Report---- start/close the prompt of Read Report. Priority--- the Priority to send MMS includes normal, high and minimum. Slide timing--- set the interval time that the other party views the multi-page MMS. The default value is 5 seconds.
[Voicemail service] Voice inbox is a kind of network service. You may be required to start this function first. For more information and the number of voice inbox, you can consult your service supplier. Voicemail of SIM Card 1 Edit: you can edit or delete the number of your voice inbox and press OK Key t save this number. Connect to voice inbox: you can dial the number of voice inbox saved in voice inbox number function list.
be started first. [Language]：Set the language of received messages. [Channel Settings]：Select or add and edit and delete channel number. 【Note】If you start this function for card 2, then card 2 will receive your cell broadcast. 6.2.3 Call Center [Call history] Your phone can record missed calls, received calls and dialed calls as well as call time and cost of all calls.
Last call time: you can view last call time in card 2 through this function. Total of dialed calls: you can view the total time of all dialed calls in card 2. Total of received calls: you can view the total time of all received calls in card 2.
Caller ID: this menu includes System Preset, Hid My Number and Send Number. System Preset: send My Number according to the way preset in system during call. Hid My Number: My Number won’t be sent to system during call. If system doesn’t support this function, maybe no call can be made. Send My number: send My number to system during call. Caller ID of card 2: this menu includes System Preset in card 2, Hid My Number of card 2 and Send Number of card 2.
Diver all data calls It needs network support. Cancel divert Cancel all divert functions. Call divert of card 2: it is a kind of network function. You should apply this service to your network operator. Through this function, you can divert the calls that meet the conditions in card 2 to another number you have specified. Call Barring: Barring outgoing calls: 1. All calls: barring all outgoing calls of card 1. 2. International calls: barring international calls of card 1. 3.
Auto redial: you can start or close auto redial function. If your phone fails to get through, it can automatically redial ten times at most to try to get through one number. Speed dial: set whether enable speed dial function and then you can edit corresponding number for speed dial. If the speed dial is ‘on’, then you can click and hold corresponding single key (key 2 to key 9) at standby interface to dial the number specified to this key. Note: card 2 doesn’t support this function.
whether switch on the phone. Press ‘No’ to switch off the phone and press ‘Yes’ to switch on the phone and register applicable network. 6.3 Entertament 6.3.1 Game There is one game (puzzle) in this phone. Please view the operation instruction of the game for detailed operation. Game settings Audio: start/close the background sound effect of games. Vibration: start/close game vibration. Volume: modify sound effect of games. 6.3.
6.3.3 Multimedia Image viewer: all of the shot photos are saved in it. Option instruction Option Description View View the selected picture/photo Browse style Two browse modes of list mode and matrix mode are supplied Use as Selected picture/photo as wallpaper, screen saver. Send Send the selected picture/photo as EMS/MMS Rename Change the name of the selected picture/photo. Delete Delete the selected picture/photo. Delete all files Delete all pictures/photos in phone book.
Record: You can record the FM broadcast during listening to it. Append: save the recording of FM broadcast. File list: instruction of file list. Option Play Send Details Rename Delete Delete all Description View the selected files. Offer three sending ways: to profiles, to MMS, to Bluetooth. Display file date and size. Change the name of selected files. Delete the selected files. Delete all files in file list. Order the pictures in Photo as name, type, time or size to facilitate search.
Flight mode Phone Setup: In this menu, you can set phone language, standby wallpaper and time. Time and Date: in this menu, you can set city, time format and date format and detailed time in certain district. 1. Set home city: set different cities. Note: this option shall be used together with Auto Update Time. The time and date can be updated automatically when the network supports. 2. Set time/date: set current time and date. 3. Set format: set time and date display format.
Network Setup Name Network selection of SIM card 1 Preferred network of SIM card 1 Network selection of SIM card 2 Description Auto: card 1 select applicable network automatically. Manual (enter Select Mode of Network Selection): Only access the network specified by user. If the specified network can’t be used, the phone will register other network automatically. Select the preferred network. Auto: card 2 select applicable network automatically.
1234. Phone lock: start or close phone lock. Phone lock is a 4-8 digit password. The factory default password is ‘1122’. You can change the password. Personal data security: set the password for data. Auto keypad lock: start or close keypad lock. Your phone has keypad lock function and will automatically lock at a certain time such as 5 seconds, 30 seconds, 1 minute and 5 minutes. Change password: you can change the default phone password ‘1122’ as the 4-8 numbers or symbols easy to remember.
out. Long press ‘#’ key at standby state to switch to mute mode and long press it again to restore to original mode 6.4.3 Shortcut function Shortcut key function: you can set shortcut key according to actual need. You can directly reach to shortcut key settings menu through pressing up, down, left and right keys at standby state. Note: Detailed menu can be used only after shortcut function is set in Settings/ Specify Function Key. 6.4.
Move: move file to Audio, Images, Audio, Photos, Video folder or other specified file folders. Delete: delete current record. Delete all files: Delete all record in all current file folders. Sort by: order the file folders according to name, type, time or size, or freely order them Photos——file folder used to store photos View: view current photo. Send: send to wallpaper, screen protection, switch on animation, switch off animation, phone book, MMS, Bluetooth.
7. Appendix I Troubleshooting Trouble The phone can’t be switched on SIM card error Poor signal No call can be dialed out. The batter fails to charge There is no network The shot photo is too dark The shot photo is unclear The shot photo distorts. Possible reason and solution The batter has no electricity. The battery is installed wrongly. SIM card is dirty. You should clean it. Reinstall SIM card SIM card is damaged. You should change a new one.
Service menu becomes inaccessible. Only part of the standby image can be seen Your SIM card doesn’t support service function. The image is too large. The recommended dimension of image is 176x220.
