CONTENTS I. SAFETY PRECAUTIONS........................................ ERRORE. IL SEGNALIBRO NON È DEFINITO. II. FRONT AND REAR VIEW OF DUAL 23 ............................................................................. 2 III. GETTING STARTED ........................................................................................................ 6 IV. KEYS AND ICONS OF YOUR PHONE ............................................................................. 11 V. BASIC OPERATIONS OF YOUR PHONE ............
I. SAFETY PRECAUTIONS Please read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch off the phone in the vicinity of chemical plants, gas stations and other locations containing explosive objects. Keep the phone far away from children. When driving, please use the hand free calling device to ensure safety. Please park the car at roadside for communication unless in emergency.
Do not recharge the phone without battery being installed. Charge the phone in well-ventilated environment and keep away from inflammable and high explosive articles. To avoid demagnetization, keep the handset away from magnetic substances, such as magnetic discs or credit cards. Keep the phone away from liquid. If soaking or erosion occurs, take the battery out and contact the supplier. Avoid using the phone in too high or too low temperature environments.
Ensure the phone is switched on and in service. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do. The unit and the accessories can contain small parts. Keep them out of the reach of small children. SOS: In case of emergency, please dial 112 to search the local network service or the default SOS contact saved. II.
III. GETTING STARTED Installation of your SIM card The miniDual works with two SIM cards. All functions of the phone work for each SIM. Before installing: Don’t distort or scratch the SIM cards. Avoid contact with electricity, dust or water.
Installation of memory card The phone supports T-FLASH card to expand the memory space. Please install or take out the memory card as per picture below - after shutting down the phone. Tip:The phone supports a memory card with capacity up to 4GB. It is recommended that only the attached standard TF card and other TF cards of well-known brand like SanDisk and Kingston are used. Other TF cards may not be compatible with the phone. Installation of battery Please use original battery and accessories only.
Note:Please follow the steps as shown in the picture to prevent damage to the battery contact points. Charge the battery The new battery must be fully charged and discharged several times to reach its best performance. Charge as soon as possible when the power is low as over-discharge may damage your battery. Disconnect the charger and the power supply and then disconnect the mobile phone when the battery is fully charged. Connect your phone to the charger as per drawing.
If the phone is switched on when charging, the power level icon at the top right corner of the screen will twinkle and will stop twinkling when the battery is fully charged. If the phone is switch off, an icon will appear on the screen to show the battery is in charging. Note:A little heating while charging is normal. Use of battery 1. Please fully charge the battery before first using the phone. 2. Please ensure you charge the mobile phone at room temperature. 3.
6. 7. 8. 9. 10. 11. During the charging/recharging period, it is best to keep phone turned off. If the battery is not used for long periods, fully charge the battery before use again. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
PIN2 code: It’s the personal identity number code required when using special functions such as call charges PUK and PUK2 (8 digits) A PUK is required to change the PIN. To change PIN2, you need to use PUK2 (personal unlock code). If PUK is not provided together with the SIM card, please refer directly to your network provider. W arning:If the PIN code is entered wrongly three times in a row, the SIM card will be locked in. Please consult the network supplier right away for unlocking immediatly.
2. Dialing key Make or answer a call. In Idle mode, press this key to browse the call history (recently dialed, missed and received calls) 3. End key Press and hold to switch the phone on or off End a call or reject a call In the menu mode return to idle screen. 4. Navigation keys In standby, access the following menus: • Up: video recorder • Down: calender • Right: shortcuts • Left: write message In menu mode, scoll through menu options Move the cursor 5.
6. * key long press the key for power-saving mode on / off 7. # key In stand-by press and hold the # activates or deactivates the Silent mode. 8. Number keys Enter numbers, letters and special characters Long press the number keys 1 to voice mail-box while standby. Long press the number keys 2 to 9 to quick-dial while standby.
Battery status Ring SIM Card 1 new SMS Vibration SIM Card 2 new SMS Vibration and ring SIM Card 1 new MMS Vibration before ring SIM Card 2 new MMS Mute Missed call in SIM Card 1 Earphone plugged in Missed call in SIM Card 2 Bluetooth on Alarm set 14
☆ Incoming Call alert method Your phone has a built-in vibration motor and buzzer which can offer the following modes for incoming calls: Ringing. Change the ringing icon as red one. Vibration Ringing after vibration Vibration and ringing Making a national call The simplest way to make a domestic call is to enter a phone number using the keypad and then simply press the dialing key.
e.g. Germany is 49, Britain is 44 and Sweden is 46, etc. Make international calls: + country code + complete phone number + dialing key. Call extension of a fixed line Some extensions of fixed line phones are not accessible directly. In such a case, you need to dial the host number and then the extension number. Simply insert the letter “P” between the host number and the extension number and you can call the extension. You can input a “P” by long pressing or repeatedly short pressing the 0 key.
V. BASIC OPERATIONS OF YOUR PHONE Switch on Press and hold on “ON/OFF” to switch on your phone. If no password settings are given for your SIM cards and cell phone, the phone will search for a network and register on a network automatically. Once registered the name of the network supplier will be shown on the screen. You can now answer or make a call.
Switch off To switch off your phone please long press ON/OFF key. The screen will show a power off animation. Please never shut down the phone by dismantling the battery it can damage the SIM card and may cause loss information loss. Making a call 1) In stand-by enter the phone number and press the calling key to call. If you want to hang up or cancel the call, please press the hook up/cancel key;When the phone is connected, you can see the call duration on the screen.
Answering a call To answer a call, press the calling key: To reject a call, press on/off key. If you have applied for calling number identification service, the calling number will show on the screen. If this number has already been stored in the phonebook it will be displayed. If the incoming call is for SIM card 1, “Call to SIM Card 1” will be display above the number / name of the caller. Same for SIM card 2. Speed dial The phone provides 8 speed dialing keys for which you can define the numbers.
- you can press the digit key and * and # key of the keypad during the period of conversation, it will be sent out in the form of DTMF signal to the other party. If you haven’t enabled this function, you can't carry out the extension number calling, etc.
Connecting to voice mailbox Your cell phone allows you to divert incoming calls to your voice mailbox. If you have received a voice mail message you will receive a notice. (the voice mailbox number has to be set up in advance). VI. THE MENU 1. ORGANIZER 1.1 Backup data Phone book backup: You can make a backup of all the phonebooks: Handset, SIM 1 and SIM 2. Restore: You can restore the backup files to your phone. You have the choice between restore by adding or restore by replacing.
1.2 Alarm Alarm function is provided. In this interface you can set alarm time/date/alert types… Once the alarm is triggered: - Press Stop to stop the alarm - press Sleep, the alarm will pause and start again after snooze time-out. Note: The alarm clock also works when the phone is switched off 1.3 Calendar With this function, you can view the calendar, schedule times as well as the following operations: 1.3.1 View today’s schedule: View the settings for today 1.3.
1.4 Calculator - Eight operations, i.e. “+”, “-”, “×”, “÷”, “m+”, “m-”, “mc”, and "mr”, are provided. Choose the Clear or press the right soft key to clear items entered. Long press the Clear or long press the right soft key to clear all content. Press the “Ok” to show the result of calculation. Note: The accuracy of this calculator is limited and the calculator Should only be used for simple calculations due to rounding errors . 1.
Information: To view the attributes of a text. Delete: To delete a text. Delete all: To delete all texts. Sort: To sort E-books in a folder. Apply: To apply the settings. Help: To open E-book help description. 1.6 Memo To create a new memo or to view memos set in the schedule. You can also perform View, Add, Edit, Delete, Delete All and jump to date etc. If a reminder is set up for a memo, the cell phone will remind you with a ring and display the contents of the memo. 1.
2. PHONEBOOK Your phone has a business-card phonebook. For each contact saved in your phone you can add the following information: three phone numbers(mobile phone number, home number and office number), company name, email, fax number, birthday, photo, ring tone, video connect and group (providing five groups: family, friend, important, colleague and others); Contacts saved on SIM can only contain name and phone number. 2.
2.5 Setting ☆ Memory status: To view memory space left ☆ Preferred storage: To select the storage directory of the current number. ☆ vCard setting: To edit or send your name cards. ☆ Owner number: To view and edit the own number ☆ SOS number: To edit SOS number of SIM card 1/2.(SOS number needs to be supported by SIM card, consult your network operator for details.) ☆ Caller groups: You can allocate melody, caller picture, video connect and group member, etc. to five different groups.
【Call timers】 Last call: Dialed calls: Received calls: Reset all: To To To To view the duration of the last call. view the duration of all dialed calls. view the duration of all answered calls. reset duration of all calls. Note: The actual call and service time in the service operator's bill may vary. It depends on such factors as network function, accounting rounding-off and tax. For details, please contact your network operator.
All received: To view the volume of data received in all online sessions. Reset counter: To reset the GPRS counter. 3.2 Call setting 3.2.1 SIM card I call setting 【Caller ID】:Includes Set by Network, Hide ID, and Send ID. Set by network:The number of the phone will be sent as per the default mode when a call is initiated. Hide ID:The number of the phone will not be sent when a call is initiated. If the system doesn't support this function, it may not make a call.
Name Description Diver all voice calls Network will divert unconditionally all your incoming calls. Divert if unreachable To divert an incoming call when your phone cannot be reached (the phone is either switched off or without network coverage). Divert if no answer To divert an incoming call after a defined time of no reply Divert if busy To divert an incoming call when your line is busy (i.e.
2) Incoming calls: All calls:To restrict all incoming calls. When roaming:To restrict all incoming calls except the numbers from your local service area. 3) Cancel all:For canceling call barring. (Password for barring is required.) 4) Change barring password:Apply to the network for changing the password for call barring. 【Line switching】 :To choose Line 1 or Line 2. 【Close group】 :This function needs the support of network . Consult your network supplier for details. 3.2.
【Time Split Firewall】:You can set a certain period to enable the firewall. 3.2.6 Connect vibration On / Off function to connect the vibration prompted. 3.2.7 Call time setting Switch on or off the “Call time display”, “Call time reminder” or “Auto quick end”. 3.2.
4.1.2 Dedicated key: You can appoint the shortcuts of direction keys. Press a key to use the corresponding function under standby interface. 4.2 Display characteristics 4.2.1 Display characteristic (idle menu display) ☆ Wallpaper: Set the background picture for standby screen. ☆ Screen saver: Set Standby on / off screen, and chose the waiting time. ☆ Power on display: Set the animation when power on. ☆ Power off display: Set the animation when power off.
Only SIM 2 open: Open card 2 only Flight mode: Enable flight mode. 4.3.2 Time and date: To set the current time, date and the display format. Set the city:To set the home city. Note: This option needs application together with the auto time renewal, and needs the network support for the operation of auto time and date renewal. Set time/date: To set the current time and date. Set format: To set the time and date display format.
4.3.8 Auto update of date and time:Enable or disable auto updating of date and time. 4.4 Network setup Name Description New Search: To search the network again. Network selection Select network: The phone only load the appointing network. When the network can’t work, the phone won’t register other network Search mode: Auto/Manual. Preferred network To select the preferred network. 4.5 Security setup: 4.5.1 SIM card 1/2 security setup 4.5.1.1 SIM card 1/2 lock:To unlock or lock SIM(PIN). 4.5.1.
requires the support of the SIM card, and SIM card 2 don’t support this function.) 4.5.1.4 Change password:Change the PIN/PIN2 password of SIM card 1. PIN(PIN1) and PIN2 code can be get from your network operator. 4.5.2 Phone lock: This function allows you to lock/unlock your phone. Note: the default password is “1122”. 4.5.3 Change Password: The default password “1122” of phone, message, phonebook, calling records and privacy protection can be changed as the desired password of 4 to 8 digits. 4.5.
center first and then sent to subscribers. If the subscriber does not turn on the phone or cannot receive messages (storage is full), the network will keep this message temporarily. The keeping period will be determined jointly by the message sending user's setting and the service operator. By using the SMS, the phone can send and receive long messages. Sending long messages may affect the charge for the messages. For details, please contact your service operator.
The following menu option functions by using left key are provided when you are writing a short message: ☆ Select SIM card 1/2:Enter sending method option and send the message. ☆ Insert: 1. Use templates:Select frequently used phases from the template and insert into message editing interface. 2. Insert object:Insert ring tones, picture, images animations and Melody etc. (Needs the support from network service) 3. Insert contact:Enter contacts and insert name and number.
phone. For details, please contact the network operator. 5.1.2 Inbox The received messages are saved in Inbox. You can view all received messages in Inbox. The messages of SIM card 1/2 are separately saved. You can perform the following operations: ☆ View: Read the current short message. ☆ Reply: reply to a received short message. ☆ Delete: To delete the current message. ☆ Get detail: Collect some contents of the current short message, such as the number of user and using website.
The message after filtering will be stored in trash box when the “Message Black List” is on 5.1.6 Templates You can edit, remove the templates. 5.1.7 Text message settings Message setting of SIM card 1/2: You can set some parameters of messages in this menu. Parts of setting menu of SIM card 1/2 are separate. 【Profile setting】 :To set the name of a profile, SMS center number, message validity period, and message type.
- Trash number list: Lists the numbers, messages received will be moved to trash box directly. - Trash content list: List the contents, messages contain will be moved to trash box directly. Setting: Dump trash number and trash content to trash box: Move the messages from either “Trash Number List” or “Trash Content List” to trash box. Dump strange number to trash box: Move the message from strange number to trash box directly. Off: Switch off the “SMS Black List”. 5.
☆ Done: Finish the edition of a multimedia message. ☆ Input method:To select the input method for editing a multimedia message. ☆ Add picture: To insert an image to the multimedia message. ☆ Add audio: To insert an audio file to the multimedia message. ☆ Add video: To insert a video file to the multimedia message. ☆ Add attachment: To insert an attachment to the multimedia message. ☆ Add slide before: To insert a new slide ahead of the current slide.
☆ Detail: To view the detailed information of the current multimedia message. ☆ Use item: Store or dial the number of the received MMS, and edit new multimedia message. 5.2.3 Outbox You can view a multimedia message failed to be sent. Operation of viewing, forwarding, deleting, deleting all, save as template, viewing message details and using item can be implemented. 5.2.
【Read report】: 【Priority】: 【Slide timing】: 【Delivery time】 : Retrieve: 【Home network】 : 【Roaming network】: 【Read report】: 【Delivery report】 : Enable/disable read report. Set priority to be sent of the multimedia messages. Set play time of each page. Set storage time of the message in Message Center. This setting depends on your network provider and your setting. Immediate, reject, postponed. Same with main network, postponed, reject. Send, not send, inquire. Enable/disable delivery report.
Connect to voice:To dial the voice mail server number stored in your voice mail server number list. Tip: In standby you can call the voice mailbox number by long pressing the key "1" after you have set the voice mailbox number. 5.5 Broadcast message (SIM card 1/2 Cell broadcast) Cell broadcast is a service provided by the network operator to send messages such as weather forecast, traffic status, etc. to all GSM subscribers in a specific area.
Audio Player options: ☆ Play: To play the selected m usic. ☆ Details: To view the detailed inform ation of the selected music. ☆ Add to tone library: To add the selected songs to the tone library for selection.
6.2 Camera With this function, you can use the built-in camera of the phone to take a photo, or adjust the camera settings. Photos generated by the camera are in JPG format. If they have been downloaded to your PC, view them with the right software! If the phone has insufficient memory space for new photos, you have to delete photos or other files in the "File Manager" function list to release memory space for new pictures.
6.3 Video Player The following operation can be performed for the selected video file of .avi format: ☆ ☆ ☆ ☆ ☆ ☆ ☆ Play: To play a video file. Send: To transfer a video file to the desired application. Renam e: To renam e a video file. Delete: To delete the selected video file. Delete all: To delete all video files. Sort by: To sort video files by desired method. Storage: To select the storage directory (cell phone or memory card) for a video file.
6.4 Video recorder Press the red icon at the bottom of the screen or press OK key to start or pause video recording. The recording time is limited by the memory of the phone or the memory card.
6.5 Image viewer The taken photos are stored in the image viewer. Descriptions of image viewer options: ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ View: To view a photo. Browse m ode: To select the mode for browsing photos. Transfer: To transfer a photo to another application. Renam e: To rename the selected image or photo. Delete: To delete the selected photo. Delete all: To delete all photos. Sort: To sort photos by the desired method. Preferred storage: To set the storage directory for photos.
6.6 Sound recorder To make an audio record, select the “Audio Recorder”. Select "Options" for the selected record file to perform the following operation: ☆ Record: ☆ Play: ☆ Go on recording: ☆ ☆ ☆ ☆ Renam e: Delete: Delete all: Settings: ☆ Send: 50 To make a audio record. To play a selected record file. Append a record to the designated files in the upper directory. (You can only append a record file in .AMR and .AWB format.) To rename the selected record file. To delete the selected record file.
6.7 Slide viewer Play the pictures selected from your phone or memory card by slide. 7. FILE MANAGEMENT Phone: Supports memory of 693K Memory card: You can use any T-flash card, but the capacity must be within 4GB. Folders or files in the memory card or the phone can be managed by the files management template. Open: Open the selected folders or memory district. New folder: Establish a new folder. Format: Format the storage. 8.
In each profile, you can set one of the following options: ☆ Tone setup: To set the tone for incoming calls of SIM card 1/2, alarm, power-on (except Bluetooth mode), power-off, messages of SIM card 1/2 and key press. ☆ Volum e: To set the volume of ring tone and key tone. ☆ Alert type: Includes Ring, Vibrate, Vibrate and Ring, Vibrate then Ring ☆ Ring type: To set the ring type, including Single, Repeated and Ascending. ☆ Extra tone: Includes four types, Warning, Error, Camp-on, and Connect.
9. SERVICES 9.1 WAP This function allows you to visit several services on the Internet through message or network. The services may include entertainment, weather forecast, news, financial information, ring tone download, stock market and other useful information. Some functions are provided by the network provider. You will see different menus according to the services provided by the SIM card. Please contact your network provider for more information.
- list and select image can be performed. Service message settings: Enable or disable. Clear cache: It may reduce speed of internet connection when there is too much data stored in the cache. Clear cookies: Delete all personal information. Trusted certificates: To view the trusted certificates provided by the system. 9.2 Data account Here you can enter the GSM and GPRS parameters of your network provider. These parameters enable your phone to surf.
10 FM RADIO 10.1 FM radio You can listen to FM Radio channels by plugging in the earphones. 10.2 Schedule FM record This function allows you to schedule a time and chose a channel for recording a program you like. 11. BLUETOOTH The mobile phone has a built-in bluetooth wireless communication function, the user can connect the phone to other bluetooth devices through the function, such as a bluetooth hands-free device, other phones or a PC which supports bluetooth wireless technology.
other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand of battery power and reduces battery lifetime.
Enable/disable. Change the name displayed of this phone Enable/disable. Set the voice to be transmitted to the phone or to Bluetooth hands-free device when using Bluetooth hands-free device. ☆ Store location:Set the path for saving the file that will be transmitted. ☆ File transmission setting: Set the directory and privilege of the directory. ☆ ☆ ☆ ☆ Visibility: Device name: Authentication: Audio path: 【About】:Introduction of the Bluetooth device. 12. GAMES Provides interesting and classical games.
VII. TEXT EDITING Your phone provides you with different text input methods. You can enter texts with your keypad GO TO: Settings > Phone setup > Preset input method to choose a default input method. Input interface - functions of the keys Press corresponding key in the input interface, for example of writing message. - Numeral 1 to 9 is used to edit text contents. - Direction keys:Control the movement of cursor. # key: Switch the input method. * key:Enter the selected of symbol.
Input the next character after the movement of the cursor.
Entering Numbers Press the corresponding key to input the corresponding number after choose the input method (in write message mode: Options – Input Method – Numeric) or “123”. Symbol input Press * key to into the interface of inputting symbol, when the phone not under the interface of symbol. Transfer direction keys to move the cursor to desired symbol, press OK key to select it. VIII. USB storage Precautions before using: ☆ Please respect procedure for USB equipment connection and disconnection.
The phone power on fails to Check that the battery is charged; Check that the battery is installed correctly. SIM card error Check whether the SIM card is dirty. If the card is dirty, clean it; Reinstall the SIM card; If the SIM card is damaged, replace the SIM card. Weak signal Check that the signal intensity indicator on the screen. 4 bars indicate a strong signal, and 2 bars or less indicate a weak signal. Call initiation fails 1.
Cannot connect to the network 1、Check whether the signal is too week or wireless interference exists around; 2、Check whether the SIM card is installed correctly, poor connection exists, or the SIM card is damaged. If the SIM card is damaged, please contact the network operator. Photos shot too dark 1、The brightness is set too low; 2、The ambient light is too dark. Photos blurred 1、The object is moving; 2、Your hand shakes when the shutter is pressed.
X.
XI.
O: It means that the concentration of this substance is under the limited concentration of standard SJ/T11363-2006. X: It means that the concentration of at least one substance is above the limited concentration of standard SJ/T11363-2006.(This product meets the standard RoHS of Europe; So far, none technology for replacing or reducing the concentrations of electric porcelain, optical glass, steel and cooper alloy exists in the world.